22 replies to this topic

[timekeeper]

Not sure if I have posted this in the right section , but I have just acquired a clubber off ebay , everything works on it fine except the note acceptor is dead , no light or nothing

Now I spoke to the bloke I bought it off and he said they dont deal with any note acceptors and they get the machines with note acceptor disabled , now the question is how to get it working , any ideas guys as I aint got a clue .


Thanks in advance

[lincs1]

Not sure if I have posted this in the right section , but I have just acquired a clubber off ebay , everything works on it fine except the note acceptor is dead , no light or nothing

Now I spoke to the bloke I bought it off and he said they dont deal with any note acceptors and they get the machines with note acceptor disabled , now the question is how to get it working , any ideas guys as I aint got a clue .


Thanks in advance

1st of all whats the machine called? 2nd what note acceptor has it got in? 3rd is there a note acceptor loom?

[timekeeper]

The machine is called Temptation , got it off ebay , thats about all I can tell you .

The chaps also said that some of the buttons were removed as they have something to do with the acceptor , they just took the micro switch off on 2 buttons , one was for "change" and other "transfer to bank" .

Loom ? being thick here , what do you mean , there is a connector block on one side that tracks back to the main board , plus a short cable with a connector on the other side just hanging there , nothing to plug it into .

[skabaz]

can you post any pictures???

baz

[timekeeper]

Not sure if these will help , was gonna take the acceptor out but cant find a long enough screwdriver to do the job lol













Looking at the meter log on the alpha display notes in = 0 , so I guess its never worked !!

[Liverpool2008]

High Quality Pics There lmfao

[impact]

nv7 note stacker loom looks ok from pics,when you machine powers up dose the nv setup do you hear running noise from it for about 10secs on the top side were the dills are dose the led status light up as green or red remember let the machine setup first

nv7 should be in ssp mode which is 1+2 down 3up 4 down or special which know as also cctalk or serial which is 1+2 down and 3+4 up

will find out tomorrow at work can remember what the setup is for astra heres a manual link for your nv7 http://www.innovativ...s/nv7manual.pdf hope its still running they still make the thing well nv9 for note stackers now

[jamesb99_1999]

Not sure if I have posted this in the right section , but I have just acquired a clubber off ebay , everything works on it fine except the note acceptor is dead , no light or nothing

Now I spoke to the bloke I bought it off and he said they dont deal with any note acceptors and they get the machines with note acceptor disabled , now the question is how to get it working , any ideas guys as I aint got a clue .


Thanks in advance

How much did you pay for this mate? I used to love this machine - never had the jackpot but saw it a few times... Any way anybody can get the roms??? Qaulity machine anyway

[ady]

How much did you pay for this mate? I used to love this machine - never had the jackpot but saw it a few times... Any way anybody can get the roms??? Qaulity machine anyway

J stop it, what are you thinking.....remember the last time lol (kidding mate )

[jamesb99_1999]

Not for me - but for somebody else to work on:) I am in retirement at the moment..

[timekeeper]

Got it for £155

And @Impact , got to the status lights and yeah it is an nv7 , no running noise from it and the bottom status light just blinks red before machine sets up and stays a blinking red after setup , tried both configs and still no good

[jamesb99_1999]

Got it for £155

And @Impact , got to the status lights and yeah it is an nv7 , no running noise from it and the bottom status light just blinks red before machine sets up and stays a blinking red after setup , tried both configs and still no good

Well done mate - and absolute bargain with note acceptor too!!

Just need to get those roms dumped now for somebody to make a classic.

[CoasterDesignerpro]

Is there a dip switch on the MPU which is not on, when i had my Ker-Ching i could turn the note acceptor off by switching the note acceptor off on the MPU board, it does not initalize at all.

Just a guess?

[timekeeper]

All sorted , thanks for those that gave some imput , just need to find out how to update it for the new £20 notes

@james is thare a astra / pluto emu then ??

[skabaz]

you need new software chips for the update for new £20 notes.

contact innovative technologies who make the note acceptor and they will sell you the update.



baz

[timekeeper]

Ok thanks baz will do .

Next question , any idea where I can get hold of the micro switch part for the two buttons that have been taken out ? Complete part as show in pic .

Thats all it need now to complete it .

[skabaz]

try astra themselves.

Customer Service - Astra Games Ltd


baz

[impact]

heres the manual for your machine. ps the nv7 must me set to parallel all dills down sorry

Attached Files

•  TEMPTATION ISSUE VE.zip   739.67KB   15 downloads

[LEEHAM]

you need new software chips for the update for new £20 notes.

contact innovative technologies who make the note acceptor and they will sell you the update.



baz

Depends on how old the NV7 acceptor is. If it's before week 18 in 2002 then you may need an extra kit from Innovative. Anything newer you can update and certainly don't need any new chips. Having said that you need a DA1 or DA2 kit from Innovative to do it along with the new currency file which you can download from Innovative. Might be worth asking at a local arcade and also probably a lot cheaper.

[serviceenginner]

we have got all the update programs on a work laptop i was thinking of offering updates on note acceptors and maybe mechs aswell
how much do u think would be a fair price per note acceptor ???