Barcrest Lucky Strike - Display Screen Problems....
Started by Domesticspark, May 25 2007 01:45 PM
33 replies to this topic
#1
Posted 25 May 2007 - 01:45 PM
Good Afternoon Chaps,
I'd appreciate your help here.
I'm new to Fruit Machines. I have bought a " Barcrest Lucky Strike Club" It is in my Brother In Law's garage at the moment.
I went up there last night to sort a problem with it Not paying out in £1 coins, I switched it on - And the disply screen went haywire - with all numbers, letters and such like, displaying fast, accross it. It did eventually go back to normal (only flickering in between) so i put it down that it might have been a bit cold?
Went up there today, and it just won't stop flickering. Could anyone tell me what this is please? And how i go about correcting it too please?
Has the actual display "Gone" and needs replacing? If so, how much are they and can i just replace them like for like? Or do i need an engineer to come and "programme" it, Please?
While we are on the subject of this Bandit. I moved the "sensor" further up the tube (as suggested by a member on my other thread) and it worked. There are 3 £1 coin Tubes and a 1 x 20p coin tube. It seems that there is no money going into the tube that "pays out" on a win (I have to fill it up anually).
Is there anything that i can do to sort that out too please?
As always, all replies are Appreciated.
Many Thanks.
I'd appreciate your help here.
I'm new to Fruit Machines. I have bought a " Barcrest Lucky Strike Club" It is in my Brother In Law's garage at the moment.
I went up there last night to sort a problem with it Not paying out in £1 coins, I switched it on - And the disply screen went haywire - with all numbers, letters and such like, displaying fast, accross it. It did eventually go back to normal (only flickering in between) so i put it down that it might have been a bit cold?
Went up there today, and it just won't stop flickering. Could anyone tell me what this is please? And how i go about correcting it too please?
Has the actual display "Gone" and needs replacing? If so, how much are they and can i just replace them like for like? Or do i need an engineer to come and "programme" it, Please?
While we are on the subject of this Bandit. I moved the "sensor" further up the tube (as suggested by a member on my other thread) and it worked. There are 3 £1 coin Tubes and a 1 x 20p coin tube. It seems that there is no money going into the tube that "pays out" on a win (I have to fill it up anually).
Is there anything that i can do to sort that out too please?
As always, all replies are Appreciated.
Many Thanks.
#2
Posted 25 May 2007 - 05:26 PM
Anyone?
#3
Posted 27 May 2007 - 01:58 PM
** Bump **
.
.
#4
Posted 27 May 2007 - 02:11 PM
sounds like damp to me
#5
Posted 27 May 2007 - 02:12 PM
I agree, nobody ever replies on fruit-emu no more do they mate, I post but they never reply and their supposed to be "helpful", I bet i'll get banned again for this mate looooooooooool. Sorry, I dont know what the problem is, I guess you'll have to waittttttttttttttttttttttttttttttttttt, it's pathetic in it.
#6
Posted 27 May 2007 - 02:45 PM
People will reply but you will have to wait as the techs on here do work!
But if you keep bumping threads you will get nothing just wait and you will get your help.
But if you keep bumping threads you will get nothing just wait and you will get your help.
#7
Posted 27 May 2007 - 03:00 PM
People will reply but you will have to wait as the techs on here do work!
But if you keep bumping threads you will get nothing just wait and you will get your help.
Thats Correct Tara ...
There is People wil help you .. But remember its Bank Holiday Weekend
So please be patient
<a class='bbc_url' href='<a class='bbc_url' href='https://www.facebook...?ref=hl</a></a>
#8
Posted 27 May 2007 - 03:53 PM
I agree, nobody ever replies on fruit-emu no more do they mate, I post but they never reply and their supposed to be "helpful", I bet i'll get banned again for this mate looooooooooool. Sorry, I dont know what the problem is, I guess you'll have to waittttttttttttttttttttttttttttttttttt, it's pathetic in it.
But you mate was a PAIN in the arse!
People didn't reply to you on purpose
#9
Posted 27 May 2007 - 03:56 PM
well i said what i thought but never mind eh!!
#10
Posted 27 May 2007 - 05:00 PM
Ok Guys, I'll sit back and wait.
Thanks for the advice.
I look forward to hearing from you.
Thanks for the advice.
I look forward to hearing from you.
#11
Posted 27 May 2007 - 05:02 PM
Should it be you need an Alpha I have One here you can have
#12
Posted 27 May 2007 - 05:07 PM
Don't power it on and dry it all off with a heater and hairdryer as it's probably damp.. Could be lots of things - you take a mobile video of it going haywire if it does and paste it on here so we can have a look.
J<br /><br /><br /><br />A man
#13
Posted 28 May 2007 - 09:19 AM
Or it could be you've accidentally knocked something inside of it when you were moving it. That's what happened with the coin mech on mine. If it's working now and again it could be a loose connection on the display. Even if it does need replacing you can pick them up on e bay for cheap if you get lucky.
Ey Up!
More vids to be added soon:
www.youtube.com/mrmystery83
"I don't care if the fans rip the shirt from my back. They put it there"
-Elvis
More vids to be added soon:
www.youtube.com/mrmystery83
"I don't care if the fans rip the shirt from my back. They put it there"
-Elvis
#14
Posted 28 May 2007 - 05:06 PM
most probably the power supply as i've had a few of these go tits up and it affects the lcd display.
it could also be the mpu but i doubt it.
i would try to source a power supply first then a mpu and if its still buggered a lcd display thats identical to the one you had working.
baz
it could also be the mpu but i doubt it.
i would try to source a power supply first then a mpu and if its still buggered a lcd display thats identical to the one you had working.
baz
#15
Posted 02 June 2007 - 10:34 AM
Thanks for the replies.
The actual fruit machine works fine, never any trouble to power up and play. The problem is - that the autual display screen, doesn't display properly. It just displays a load of random letters, numbers and 'mumbo jumbo',
I have a digital camera that records clips on video (approx 15 seconds), how would i post that on here, when i take a short clip of it please?
Many Thanks.
The actual fruit machine works fine, never any trouble to power up and play. The problem is - that the autual display screen, doesn't display properly. It just displays a load of random letters, numbers and 'mumbo jumbo',
I have a digital camera that records clips on video (approx 15 seconds), how would i post that on here, when i take a short clip of it please?
Many Thanks.
#16
Posted 02 June 2007 - 10:35 AM
Should it be you need an Alpha I have One here you can have
Forgive my Ignorance Ad. But what is an "Alpha" please?
#17
Posted 02 June 2007 - 10:47 AM
Forgot to mention that i did open the Back up, to change several bulbs.
After i did this i was unable to "collect" any winnings. I then opened it back up and discovered that i had knocked the block connector, going to it. Worked fine when i pushed it back in. I did check "Other" terminations, but they appeared fine.
I honestly can't remember if it went like this before or after opening the "Back" to change the bulbs.
__________________________________________________
Regards.
After i did this i was unable to "collect" any winnings. I then opened it back up and discovered that i had knocked the block connector, going to it. Worked fine when i pushed it back in. I did check "Other" terminations, but they appeared fine.
I honestly can't remember if it went like this before or after opening the "Back" to change the bulbs.
__________________________________________________
Regards.
#18
Posted 02 June 2007 - 10:52 AM
Forgive my Ignorance Ad. But what is an "Alpha" please?
Hope this helps
Im quite artistic dont ya think ?
Mmmmmm...Sandy ive 'ad her ye know.
#19
Posted 03 June 2007 - 04:46 PM
Thank you Todd - That's great, Thanks.
adydb - That would be great, Thanks. How much please mate?
Oh, Could i ask you all another question please?
When i switch the Machine On AND Off - it ejects a 20p coin. Is this the Norm?
adydb - That would be great, Thanks. How much please mate?
Oh, Could i ask you all another question please?
When i switch the Machine On AND Off - it ejects a 20p coin. Is this the Norm?
#20
Posted 05 June 2007 - 06:52 PM
no its not the norm.
you may have a faulty power supply.
baz
you may have a faulty power supply.
baz
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users