i have got a electrocoin, super red bar, but when i power it up, all that happens is the reels just sort off move slightly, and the bulbs at the top of the glass flicker on and off, also the meters at the bottom click round loads of times, ive checked everything is pluged in correctly and all seems fine, it looks to me like there isnt enough power going to it, does that mean my power unit is knackered? or can any1 help please? thanx!
6 replies to this topic
#2
andy.leather
-
- New Members
- 20 posts
Junior Member
Posted 01 June 2007 - 11:31 AM
i forgot to say that the four red lights, light up on the circuit board if that helps!
#3
andy.leather
-
- New Members
- 20 posts
Junior Member
Posted 02 June 2007 - 10:21 AM
i am not being funny! but i have had no replies, does that mean nobody knows whats up. should i buy a new power supply and a new circuit board? if so how much would they cost and wheres the best place to get them?
#4
joebee1966
-
- New Members
-
- 263 posts
Member
Posted 03 June 2007 - 09:48 AM
i think you will find you need a new board.is it the one that gives you the extra nudges
#5
MAGIK
-
- Gold Supporters
-
- 195 posts
Member
Posted 03 June 2007 - 06:12 PM
its the program roms not being addressed correctly- look under the reel shelf at the PCB, theres two ROM chips with labels on them, make sure they are securely seated- disconnect the fuse for the 50v as well in case there is a meter fault- for some reason the leccy has CRAP IC sockets
#6
andy.leather
-
- New Members
- 20 posts
Junior Member
Posted 05 June 2007 - 10:06 AM
ok cheers ile have a look at the board and disconect the fuse, and will let you know how i get on!
#7
andy.leather
-
- New Members
- 20 posts
Junior Member
Posted 06 June 2007 - 08:37 AM
i have checked the rom chips are pushed in properley, and they are, i have also unplugged the fuse, it doesnt make any difference. do you think i need new rom chips? if so where would i get them and how much about? thanx!
4 user(s) are reading this topic
0 members, 4 guests, 0 anonymous users
