10 replies to this topic

[xiano8494]

I have a psycho cash beast club that dies the other day. I dutifully got the manual out and it showed that the 12V rail was dead. Checked the PSU and the fuse holder was popped out, it had corroded I guess.

Decided I'd try to fix it myself and opened up the PSU to remove the old fuse holder and noticed that the 34V fuse holder wasn't connected and the wires were twisted together, upon close inspection it looks like the same fate had befell that fuse holder.

So what I need is to know where I can get new fuse holders and the relevant fuses? (One for the 34V 10A and one for the 12V 10A)

I know there's a couple of engineers on here, I don't know if I could get some off you and bung you the cash?

Cheers,
Alex

[skabaz]

i'll see what i can do for you.

baz

[xiano8494]

Any luck Baz?

[roderz]

Have ya got a pic?

[skabaz]

is it the older power supply or the newer one??

pic would confirm i can get the correct type.

baz

[xiano8494]

OK, here they are.

It says:
Barcrest MPU-LF Transformer & Power Supply
on one side
and:
Barcrest LVD Green Label Transformer
on the other

Attached Files

•  07-06-09_10-06.jpg   121.11KB   15 downloads
•  07-06-09_10-061.jpg   115.35KB   16 downloads

[skabaz]

thanks for the piccy mate.

will check on sunday for you.

baz

[xiano8494]

No luck then? If not, do you know where I could possibly buy some from?

[skabaz]

cant find any mate

i think you may be struggling to get the fuse holders on their own.

but you could try these

Knobs, Fuse & Battery Holders
Search Results

baz

[impact]

got some will try and sort a couple for you over the next couple of days if that ok pm your address will pop these in the post 1" 1/4 type thats the longer ones as to the 1A fuse which would be 20mm

baz no old barcrest psu`s knocking about m8

[skabaz]

none at the moment impact apart from my own personal spares in my car.

baz