9 replies to this topic

[martyn]

Good morning all,
I have a Monopoly Edition 60 by JPM and I would like to know how to empty the coin tubes automatically (at the mo I am undoing the jubilee clips on the tubes bases and trying to catch all the coins, not always succesfully)!!
I do not unfortunately have a manual.
Thanks Martyn

[Daza5056]

I don't think there is a way to do it automatically

When I had my old machine that had tubes this is what I had to do.

At the bottom of the tube is a magnet (looks like a large block at the rear base of the tube)- you have to slide this backwards and forwards each time releasing a coin. You continue doing this until the tube is empty.

[lincs1]

open the back door then put the machine in test mode, when test 1 is displayed press the button next to start and the hold buttons will flash. i think its left hold for £1's n 3rd hold for 20p's or vice versa.

[mangolio]

open the back door then put the machine in test mode, when test 1 is displayed press the button next to start and the hold buttons will flash. i think its left hold for £1's n 3rd hold for 20p's or vice versa.

I had this machine and I think that is what I did. You can do it like this and is much easier than undoin the clips and manually moving the payout bit at the bottom.

[Ride_my_cork_hard]

LOL !!

...and then of course there are a few other ways of also removing the coins out of the old style JPM's like Monopoly Edition 60.

Best not go into that on an open forum.

Ahhhhhhhh, those were the days.

[martyn]

Hi all, Thanks for all your replies, I will try out the Lincs Leisure posting first, but.......how do I put it in test mode, !!!!!!
all you experts must bear in mind I have no manual and am in total ignorance of the mysteries of fruit machines!!
Cheers,
Martyn

[Ride_my_cork_hard]

The 'Test' button......

With (obviously) the back door open look on the right side of the machine at the grey electronics unit cover.(About knee height)

You will notice a hole just big enough to put your finger in. Stick the finger down the hole and you find a button. Keep your finger pressed on it for a quick second and then let it go (If you keep the button pressed down for say 2+ seconds you will put the machine in test play mode instead of just coin, display test mode)

Steve

[martyn]

The 'Test' button......

With (obviously) the back door open look on the right side of the machine at the grey electronics unit cover.(About knee height)

You will notice a hole just big enough to put your finger in. Stick the finger down the hole and you find a button. Keep your finger pressed on it for a quick second and then let it go (If you keep the button pressed down for say 2+ seconds you will put the machine in test play mode instead of just coin, display test mode)

Steve

Thanks Steve, I will try asap, I will let you know the result.
Cheers,
Martyn

[martyn]

Hi Steve (and everyone else!) It worked as you said, many thanks to all.

regards,
Martyn

[impact]

press the red button on the impat mpu for a sec the let go if holding for more then 5 to 10 sec machine will go into demo mode

sorry cork did not read your thread