4 replies to this topic

[Fogg]

Hi all,
Can anyone help with this question?
I found an IC (18 pin DIL) in the back of my machine (Cresty MPU5 - Addams Family) in conductive foam with a label that says "105ADMF" - maybe a ROM or PIC for the program card? What is this for, anyone know?

TIA
Fogg

[impact]

it`s a pic for £25 or £15 software

[Fogg]

Cheers Impact - I have all the decals to run at £8/£15/£25 - would I need to use this PIC to run at 15 or 25 (presumably in place of the 10BC25 on the program card) or would it run just using the correct stake/jp key?

TIA
Fogg

[impact]

Your software should of been writen to run the jp. Try different pop key`s ie £8 10p ect.

If then dose not work try it on £5 10p

Your software should run as £5/8 £15 and £25 adam0.2s or 0.3s/0.5s

As yours was the first in the new genesis 2001 cabnet and not the genesis blue. They were the more small in hight. Yours also is a 4pin purple hopper in a tank type shell running a more std sanken psu. As to the older model using lvd psu`s

Cash run was a both cabnet machine only to what i recall genesis blue and 2001 cabnet. What a pain.

[Fogg]

Thanks again for the info Impact - I will try the key settings as you suggest - the s/w is indeed Addams 0.3 as you said in your post, and the PSU is the Sanken SPSU in the New Genesis taller model (it was a pig to get in the house!!)
Cheers all
Fogg