Jump to content


Photo
- - - - -

Help/Advice needed please


  • Please log in to reply
5 replies to this topic

#1 thedoctor46

thedoctor46

    Junior Member

  • New Members
  • 3 posts

Posted 23 September 2007 - 08:54 PM

Hi there, after looking at this site for a couple of months i decided to join as i was in the market to buy a fruit machine.
This is my first post as you can see!
I have just bought Dels Millions machine which is in good condition works fine etc except the feature board does not light up and the digital numbers on the sell goods feature and nudge pot do not show :bigeyes22: i was wondering if this is just a matter of replacing the bulbs or not? I thought it was a bit suspect that all the bulbs were out on that particular face of the machine (the one facing you) any help would be appreiciated thanks in advance Darrel.

#2 cardie

cardie

    Me Gusta

  • Layout Creator
  • PipPipPipPipPip
  • 3431 posts

Posted 23 September 2007 - 09:39 PM

im no machine mechanic but i wud try checking all the plugs on the motherboard are all plugged in properly and no pins are bent try pullin one of the bulbs out and if its all black at the top of the bulb its defiantly gone mate

My Youtube


Posted Image

Rest in peace Barcrest !

Quit Gambling as of 3rd of March 2012


#3 lincs1

lincs1

    He Who Dares Wins

  • Banned
  • 3803 posts

Posted 23 September 2007 - 09:46 PM

Hi there, after looking at this site for a couple of months i decided to join as i was in the market to buy a fruit machine.
This is my first post as you can see!
I have just bought Dels Millions machine which is in good condition works fine etc except the feature board does not light up and the digital numbers on the sell goods feature and nudge pot do not show :bigeyes22: i was wondering if this is just a matter of replacing the bulbs or not? I thought it was a bit suspect that all the bulbs were out on that particular face of the machine (the one facing you) any help would be appreiciated thanks in advance Darrel.



first of all i would check the fuses on the psu(power supply) failing that then it would be either a bent pin on the lamping connectors or the scorp board is fecked its very rare that the psu is at fault on these old scorp 2 machines



lincs1

#4 thedoctor46

thedoctor46

    Junior Member

  • New Members
  • 3 posts

Posted 02 October 2007 - 09:38 PM

Hi again and thanks all for the replys, checked the connections on the board one was disconnected so connected it and hey presto!
Thanks again guys for the help

#5 lincs1

lincs1

    He Who Dares Wins

  • Banned
  • 3803 posts

Posted 02 October 2007 - 09:58 PM

Hi again and thanks all for the replys, checked the connections on the board one was disconnected so connected it and hey presto!
Thanks again guys for the help




hi darrel am pleased you sorted the problem.


its a good machine to play and lots of fun to play.



lincs1

#6 thedoctor46

thedoctor46

    Junior Member

  • New Members
  • 3 posts

Posted 03 October 2007 - 10:48 PM

Yes it is lincsleisure thanks again!




2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users