Coin mech problem
Started by
Guest_Ja20n_*
, Oct 11 2007 03:23 PM
14 replies to this topic
#1 Guest_Ja20n_*
Posted 11 October 2007 - 03:23 PM
Hey,
my fruit machine wont accept any coins Its a Super Blackjack Club (Barcrest)
they just drop through straight to the pay tray i've had a poke about ive taken the coin mech off but im having trouble even identifying it, for maybe replacment parts even a fix
any help would be aprriciated
thanks
ps. it did accept a 20p coin one time but only ever time after a few tries
my fruit machine wont accept any coins Its a Super Blackjack Club (Barcrest)
they just drop through straight to the pay tray i've had a poke about ive taken the coin mech off but im having trouble even identifying it, for maybe replacment parts even a fix
any help would be aprriciated
thanks
ps. it did accept a 20p coin one time but only ever time after a few tries
#2
Posted 11 October 2007 - 03:26 PM
try cleaning the inside of it and check all the connections on the mech and on the motherboard it cud just b a loose cable or summet
Cardie..
Cardie..
#3
Posted 11 October 2007 - 03:55 PM
if you have checked all the connections and still no joy then it could be that the mech needs re-programming or replacing or the mech loom is knackered failing that then its a mpu4 board fault.
lincs1
lincs1
#4 Guest_Ja20n_*
Posted 11 October 2007 - 04:20 PM
Thanks for the help
How would it be reprogramed also how much is a new coin mech and how would I know which one is the right one
How would it be reprogramed also how much is a new coin mech and how would I know which one is the right one
#5 Guest_Ja20n_*
Posted 08 November 2007 - 02:55 PM
Am i getting somewhere on this? Coin mech is now accepting the coins eg. putting coins in the correct tubes and in the cashbox BUT its not adding credits to the fruitmachine is this a new problem?
#6 Guest_Ja20n_*
Posted 08 November 2007 - 03:46 PM
never mind its all fixed all working thanks for the help
#7
Posted 08 November 2007 - 07:07 PM
never mind its all fixed all working thanks for the help
How did you solve the problem???
#8
Posted 08 November 2007 - 07:14 PM
How did you solve the problem???
with abit of TLC i bet
pmsl
#9
Posted 17 November 2007 - 09:36 PM
Hi im having the same problem with crazycapers i bought the other day ok it needs a good dusting inside but at the mo only taking 50p's, £1 coins go in but end up in the box below with the 50's....and the machine is not registering the credits only the 50p's there are a few wires not connected but none near the coin mech and i have no knowledge on real frut machines just wanted one to save the pennies lol
#10
Posted 17 November 2007 - 10:04 PM
Hi im having the same problem with crazycapers i bought the other day ok it needs a good dusting inside but at the mo only taking 50p's, £1 coins go in but end up in the box below with the 50's....and the machine is not registering the credits only the 50p's there are a few wires not connected but none near the coin mech and i have no knowledge on real frut machines just wanted one to save the pennies lol
could be a job for super replacment mech.....pmsl
#11
Posted 17 November 2007 - 10:08 PM
could be a job for super replacment mech.....pmsl
oops cost more then the machine then lol
i did get a manual so better look in it as i dont know which tube is which lol
#12
Posted 17 November 2007 - 10:12 PM
oops cost more then the machine then lol
i did get a manual so better look in it as i dont know which tube is which lol
mech's don't cost that much fella try ebay ya never know ya might be suprised how cheap they are
#13
Posted 17 November 2007 - 10:14 PM
mech's don't cost that much fella try ebay ya never know ya might be suprised how cheap they are
more then £20 quid pmsl
#14
Posted 17 November 2007 - 10:16 PM
pm me with what type of coin mech and i see what i have in my shed.
baz
baz
#15
Posted 17 November 2007 - 10:18 PM
more then £20 quid pmsl
depending what mech it is then u can spend anywhere upto £25 maybe £30
anymore than that then contact advance leisure and tell him lincs sent u pmsl
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users