17 replies to this topic

[magpie]

hey guys, i dont post on here much but im always looking at the new releases etc.

i got my own machine off ebay about 2 years ago and for about a year its been broken. im not going to call someone out to fix it as it cost £50 so its not really worth it.

The alarm code is: ERROR=10 44
the machine is an ACE Caesars Palace 15jp.

if anymore info is needed then just ask. would really apretiate some of your knowlage!!

thanks, Scott

[magpie]

sorry i put the alarm code in wrong its:

ERROR= 01 44

wouldnt let me edit my post for some reason =/

[CrAzYbAr]

After searching through this topic
http://www.fruit-emu...or-91-00-a.html

I found out it to be Non payout 100p...Dont know what it means if it's an IOU or the hopper's faulty, but it narrows it down.

Think that post Moco did then could be stickied, saves a good bit of time deciphering the stuff

[cardie]

Try Checking the connection on the hopper .. far as i no its the same cabinate as my old machine and there is a plug on top of the hopper on mine and i used to get this alarm a few times

[skabaz]

yeah if there are no coins jammed in the hopper then you will have a faulty hopper.

pm me if you need a replacement as i'm sure they are the purple hopper bed and i have about 3 working ones in my shed from old machines i've scrapped.

baz

[magpie]

wow thanks for all the help guys ill give it a try now

[magpie]

right...

i really dont think theres any hope:bigeyes06: the bit on top of the hopper. (if what i think a hopper is is correct) was loose, ive taken this off- it came away very easily. and now i done have a clue how to put it back.

the only way i think we could do this is if i take pictures of whats wrong and you try and make out what it is

[kriss]

right...

i really dont think theres any hope:bigeyes06: the bit on top of the hopper. (if what i think a hopper is is correct) was loose, ive taken this off- it came away very easily. and now i done have a clue how to put it back.

the only way i think we could do this is if i take pictures of whats wrong and you try and make out what it is

Hi magpie Get your camarea then and show us those pics asap


Kriss

[skabaz]

yeah mate get some piccys up as that will help loads as its quite difficult to know what you have done already.

baz

[impact]

A poor impact system not well, well by just givin £2 a month through the coin mech we can just keep press start untill the credits reach 0

ps if still no go hopper driver pcb thats the one under the silver covered place to where the loom plug into

[magpie]

Right guys, im getting rid of the machine next week due to it not working.

One last effort to get it to work ive taken some pictures of what i think is wrong with it. (the part that i took off to see if there was any coins jammed in in but now i cant get it back on)

Just ask if theres anything that could help you diagnose whats wrong, ive got my camera working now so i can take as many pictures as needed.

Thanks guys, really apprechiate any help i get.

on a side note, if anyone would like this machine for spares/ repairs im in Worthing, West Sussex. (but if it could be fixed then id profer that:bigeyes16:)

[magpie]

pics:

http://i281.photobuc...ns/DSCF0197.jpg

http://i281.photobuc...ns/DSCF0198.jpg

http://i281.photobuc...ns/DSCF0199.jpg

like i said, just point me in the direction of what you need to see.

Thanks.

[richy76]

in pic 1 the Y Chute the small one with the white on it, this goes in at the top fat end 1st with white bit at the bottom, push it down into the clips.

The other piece is the coin mech this should slot in sideways once the Y chute is on"

If coins are jamming in the mech or if it is rejecting all the time, take the coin mech out & it has a flap on it with a spring on, pull the flap out & wipe in here with polish on a cloth to remove dirt that stops coins going in.

Edited by richy76, 14 December 2008 - 09:17 PM.

[magpie]

and do you think this is the only problem with it?

EDIT: thanks for the info on the coin mech, have managed to fit that now.

only thing is i dont fully understand how to fit the other thing =/

Edited by magpie, 14 December 2008 - 09:25 PM.

[magpie]

Bump

Hoping to hear from Baz on this one

[skabaz]

hello mate

the error that you have ,if it is still 01 44,is payout verification error £1.

this means either the hopper that spits out the coins is disconnected or the little board where the hopper plugs into is faulty.

the error is basically telling you that it cannot verify if a hopper is fitted to the machine.

or the hopper is faulty.


baz

[magpie]

should i upload a picture of the whole inside of the machine and then you can point me in the right direction of where to go and what to do

[skabaz]

would be good matey.

baz