Jump to content


Photo
- - - - -

How to exit free play mode?


  • Please log in to reply
19 replies to this topic

#1 rickydg

rickydg

    Junior Member

  • New Members
  • 16 posts

Posted 19 March 2008 - 09:17 PM

I cant seem to exit free play mode on my mpu5. Every time i press start it gives me £5 credit. Any ideas?

#2 fruitmachineemu

fruitmachineemu

    ITS GOLDEN GAME TIME

  • New Members
  • PipPip
  • 507 posts

Posted 19 March 2008 - 09:39 PM

the door closed?

#3 rickydg

rickydg

    Junior Member

  • New Members
  • 16 posts

Posted 19 March 2008 - 10:01 PM

Well that might be it, cos the door is showing as open all the time on the display. Have checked the door switch and is working fine. Have even tried removing door switch from the loop, but still shows as open! :bigeyes24:

#4 rickydg

rickydg

    Junior Member

  • New Members
  • 16 posts

Posted 19 March 2008 - 10:10 PM

Have also tested bottom door switch to no avail.

#5 stu55554

stu55554

    Qualified IT Technition

  • New Members
  • PipPipPip
  • 757 posts

Posted 19 March 2008 - 11:03 PM

if theres another switch attached inside you will ned to tape it in so it will go in normal my monopoly was enabled only in test by a extra door switch someone had fitted
toddy likes to change signatures as he has nothing better to do..

#6 cardie

cardie

    Me Gusta

  • Layout Creator
  • PipPipPipPipPip
  • 3431 posts

Posted 19 March 2008 - 11:14 PM

mess about with the wires on the back off the white swich on the cabinate one of them mite of cum out

My Youtube


Posted Image

Rest in peace Barcrest !

Quit Gambling as of 3rd of March 2012


#7 todd1970

todd1970

    The furniture

  • Regulars
  • 6818 posts

Posted 19 March 2008 - 11:17 PM

mess about with the wires on the back off the white swich on the cabinate one of them mite of cum out


How rude Cardie the word is "come" not "cum" google it..youll see the difference.
Mmmmmm...Sandy ive 'ad her ye know. :)

#8 rickydg

rickydg

    Junior Member

  • New Members
  • 16 posts

Posted 20 March 2008 - 02:58 AM

mess about with the wires on the back off the white swich on the cabinate one of them mite of cum out



Have already tried that!

#9 skabaz

skabaz

    Engineer of the World

  • New Members
  • PipPipPipPipPip
  • 2778 posts

Posted 20 March 2008 - 06:35 PM

check your hopper dump switch inside the bottom cashbox because if i wire broken of this the it will show as door open.

baz

#10 rickydg

rickydg

    Junior Member

  • New Members
  • 16 posts

Posted 20 March 2008 - 06:37 PM

What should that switch do? I mean should it show anything on the display when i press it?

#11 skabaz

skabaz

    Engineer of the World

  • New Members
  • PipPipPipPipPip
  • 2778 posts

Posted 20 March 2008 - 08:22 PM

close the top door and turn the refill key.

press the hopper dump button and the machine should make a noise and will say hopper dump on the alpha.

if it does this then its not hopper dump button that is causing the problem.

baz

#12 rickydg

rickydg

    Junior Member

  • New Members
  • 16 posts

Posted 20 March 2008 - 08:30 PM

When I open the bottom door when the top door is closed the machine just displays "Percent Key ?" and bleeps. So when i pressthe hopper dump button nothing happens.

#13 skabaz

skabaz

    Engineer of the World

  • New Members
  • PipPipPipPipPip
  • 2778 posts

Posted 20 March 2008 - 08:41 PM

do you have a % key in your machine?

#14 rickydg

rickydg

    Junior Member

  • New Members
  • 16 posts

Posted 20 March 2008 - 08:42 PM

Nope, using dip switches on mpu5 board.

#15 skabaz

skabaz

    Engineer of the World

  • New Members
  • PipPipPipPipPip
  • 2778 posts

Posted 21 March 2008 - 06:42 PM

try getting an actual % key and see if that sorts out your problem as the machine wont play in real money mode if your % settings are wrong.

i never use the % on the motherboard always a % key.

baz

#16 rickydg

rickydg

    Junior Member

  • New Members
  • 16 posts

Posted 21 March 2008 - 08:24 PM

Ok, will get one off ebay tonight. Are the adjustable ones any good?

#17 skabaz

skabaz

    Engineer of the World

  • New Members
  • PipPipPipPipPip
  • 2778 posts

Posted 21 March 2008 - 08:26 PM

yeah get an adjustable one as then you dont need to buy another again.

also i have put up a link to the settings for the % key on another thread(the force 10 one)

baz

#18 rickydg

rickydg

    Junior Member

  • New Members
  • 16 posts

Posted 21 March 2008 - 08:37 PM

ok, thanks for your help, i'll let you know how i get on when it comes. Is this a common fault?

#19 skabaz

skabaz

    Engineer of the World

  • New Members
  • PipPipPipPipPip
  • 2778 posts

Posted 21 March 2008 - 08:47 PM

only if you have the % key set at an invalid % or the stake and prize settings are wrong.

your game chips may only allow the stake and prize that you originally got the machine at and if its set at anything else you will get an invalid mode error as well.

i very much doubt its an mpu fault.

if the user name impact reads this he may shed more light on this as he seems to know more about this tech than what i do(hence his user name)

baz

#20 rickydg

rickydg

    Junior Member

  • New Members
  • 16 posts

Posted 21 March 2008 - 09:00 PM

Ok thanks :-)




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users