Hi Guys
I Have A Jpm Impulse Machine, Some Of The Bulbs Have Blown So I Bought Some 5mm 12v Lights And When I Fitted Them They Were All Really Bright And Burning Out, Also Burning The Lamp Holder.
Can Anyone Tell Me If I Have Got The Right Bulbs And Should I Have Got 24v Ones.
Thanks
Rob
4 replies to this topic
#2
kriss
-
- Layout Creator
-
- 2735 posts
Creator Of Stuff
Posted 23 April 2008 - 08:17 PM
Yeah man obvisally they were the wrong bulbs try a fruit machine site or even e-bay for the proper bulbs, dont break your machine 
Kriss
Kriss
#3
skabaz
-
- New Members
-
- 2778 posts
Engineer of the World
Posted 23 April 2008 - 09:00 PM
sounds like you got the right bulbs but you have a faulty mpu.
baz
baz
#4
cardie
-
- Layout Creator
-
- 3431 posts
Me Gusta
Posted 23 April 2008 - 09:51 PM
they should be 12 volts as my crazy club was .... i recon your mpu lamp controllers fooked or the power supply units had its day
#5
impact
-
- Regulars
-
- 1280 posts
Error 9.4
Posted 23 April 2008 - 10:03 PM
impact make sure machine is off should be a row of upto 16 lamps use a meter set this the ohms check all resisters next to the transister above from the lamp socket 2.2 ohms any highter then there is a poss that the transister has gone high too. why jpm impact has the same fault across all 3 models i will never know.
.._-=It`s not a problem only a challenge =-_..
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
