problems with JPM impact machine
Started by lips2k8, May 06 2008 10:18 PM
7 replies to this topic
#1
Posted 06 May 2008 - 10:18 PM
Hi there, I have the JPM Euphorea machine and are having a few problems with it... I tracked one problem down to the cash door switch - turns out the previous owner managed to smash it into peices !!! dose anybody have a replacement to lend, donate, or sell me? and my second problem is when the machine is first turned on I get error 60 00 i turn it off and on a couple of times then the error goes away? any ideas what causes this?
#2 Guest_DAD_*
Posted 06 May 2008 - 10:28 PM
60 00 is a general meter fault IIRC.
#3
Posted 06 May 2008 - 10:29 PM
i can suppy a replacement door switch but i am going on holiday on wednesday and wont be back until next monday.
error 60 means you have a faulty electronic coin meter which i can also supply.
baz
error 60 means you have a faulty electronic coin meter which i can also supply.
baz
#4
Posted 06 May 2008 - 10:34 PM
my crazy club had this problem i managed to get rid of it by clearing the ram but it came back up every now and then and ended up perminant so i stuck a new one in
#5
Posted 06 May 2008 - 10:58 PM
that would be great if you could thank you, just let me know how much I have to pay you. I am in wolverhampton.
#6
Posted 08 May 2008 - 06:04 AM
just out of curiosity cardie1, how did you clear the ram...? I might try that aswell.
#7
Posted 08 May 2008 - 08:04 AM
to clear the ram you take the battery out for 30 secs then put it back in..
toddy likes to change signatures as he has nothing better to do..
#8
Posted 08 May 2008 - 09:49 AM
Or you can short the battery by gripping with plyers/holding a peace of wire to each end for 10 sec's (machine must be off)
Think your hard enough?
http://ForYouToEnvy.mybrute.com
Join clan Fruit-emu.com here
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users