22 replies to this topic

[jonno 85]

It's the "eye" that sees when a coin is ejected through the outlet slot.

So the the thing that hangs out of the hopper and where the coin comes out?

I'm no expert, and I've never seen the inside of a machine properly as I've never actually owned one, but is it normal for it to be full of cobwebs? I know spiders get in anywhere, but as far as I can remember from when I used to play and they opened them, cobwebs were not the 'norm'?

It's kept in my shed and there's a fair few spiders around.

[aaamusements]

So the the thing that hangs out of the hopper and where the coin comes out?

No, you must be looking at the plastic chute

You need to take the two main halves of the hopper assembly apart, take out the motor/disk assembly, the opto is located in the output slot of that part.

[RB]

No, you must be looking at the plastic chute

You need to take the two main halves of the hopper assembly apart, take out the motor/disk assembly, the opto is located in the output slot of that part.

Image of the disk so you know your on the right track.

Attached Files

•  hopperbed1.jpg   14.82KB   12 downloads