8 replies to this topic

[ash3r100]

Hi, i'm new to this forum

I recently bought a jtrar machine and it was working fine but now when i turn it on the alarm goes off and it says error stuck button alarm on the screen i have tried resetting the ram but it dosn't seem to help, the machine still works after it has started, but the alarm everytime i turn it on gets a bit dull!

can anyone help?

Cheers Asher

[Chris_010292]

Hi, i'm new to this forum

I recently bought a jtrar machine and it was working fine but now when i turn it on the alarm goes off and it says error stuck button alarm on the screen i have tried resetting the ram but it dosn't seem to help, the machine still works after it has started, but the alarm everytime i turn it on gets a bit dull!

can anyone help?

Cheers Asher

Hi, the only way to stop this is to actually try cleaning the button that is getting stuck each time. To do this, you simply twist the button from the inside of the machine left or right and it will stop, then just pull it out. After that squeeze the two clips together that hold the button in, and remove the button from the outside of the machine. Then simply just remove all of the sticky stuff that gets on the buttons, I usually just use a bit of polish, it seems to work a treat, once you have cleaned it put the button back into the front of the machine, then twist the elctrical part back onto it and the problem should be solved.

Good luck:)

Chris.

[kriss]

Could it be a stuck button:bigeyes10:

*edit* Chris beat me to it.

[ash3r100]

cheers for your help, how do i find out which button is stuck? or do i just have to try them all!!

Thanks again

[Chris_010292]

cheers for your help, how do i find out which button is stuck? or do i just have to try them all!!

Thanks again

LOL, when the alarm goes off, the exact button should flash, just keep an eye out.

[kriss]

cheers for your help, how do i find out which button is stuck? or do i just have to try them all!!

Thanks again

I would of thought so mate
*edit* I Think ill leave Chris to this Posted same time again mate lol.

[ash3r100]

Sods law, i turned it on and off a couple of times and it appears to ahve stopped! but i will remember it for the future.

thanks alot

Asher

[kriss]

No probrlem mate you asked nicely any future probs just ask anyone.
Welcome to Fruit Emu

[aaamusements]

Hi, the only way to stop this is to actually try cleaning the button that is getting stuck each time. To do this, you simply twist the button from the inside of the machine left or right and it will stop, then just pull it out. After that squeeze the two clips together that hold the button in, and remove the button from the outside of the machine. Then simply just remove all of the sticky stuff that gets on the buttons, I usually just use a bit of polish, it seems to work a treat, once you have cleaned it put the button back into the front of the machine, then twist the elctrical part back onto it and the problem should be solved.

Good luck:)

Chris.

Not sure what buttons you have to twist to get the switch out of though?
Most the switch/ bulbholder just pulls out.