Jump to content


Photo
- - - - -

Barcrest Spice is Right £1 Hopper Prob


  • Please log in to reply
6 replies to this topic

#1 kems

kems

    Junior Member

  • New Members
  • 42 posts

Posted 24 October 2008 - 08:12 PM

Hi, I have now got another machine, its all working fine except the pound coins are not getting diverted to the £1 hopper.

I put some cash in the hopper and dumped them and put it back in.. the machine reports its got say £25 so its not bypassing cos it thinks its full.

anything else i need to check?

Cheers

Kems

#2 aaamusements

aaamusements

    Admin

  • Administrators
  • PipPipPipPipPip
  • 3508 posts

Posted 24 October 2008 - 08:30 PM

Hi, I have now got another machine, its all working fine except the pound coins are not getting diverted to the £1 hopper.

I put some cash in the hopper and dumped them and put it back in.. the machine reports its got say £25 so its not bypassing cos it thinks its full.

anything else i need to check?

Cheers

Kems


So you did a full hopper dump and it's still not diverting the pound coins to the hopper? That's odd.
Sounds like a routing problem.

Try clearing the ram first though.

#3 kems

kems

    Junior Member

  • New Members
  • 42 posts

Posted 24 October 2008 - 08:37 PM

sorry dont know how to clear ram? any help would be great :)

#4 aaamusements

aaamusements

    Admin

  • Administrators
  • PipPipPipPipPip
  • 3508 posts

Posted 24 October 2008 - 08:37 PM

IS it MPU5?
If so there is a little link next to the silver battery on the main board, pull the link off for a few seconds and that will clear the ram.

#5 cardie

cardie

    Me Gusta

  • Layout Creator
  • PipPipPipPipPip
  • 3431 posts

Posted 24 October 2008 - 08:49 PM

sorry dont know how to clear ram? any help would be great :)

open the machine pull out the jackpot key which should be the top one of 2 plugs on the game card in the motherboard and start the machine then select a price of play and jackpot then turn the machine off put the plug back in and turn on the machine

My Youtube


Posted Image

Rest in peace Barcrest !

Quit Gambling as of 3rd of March 2012


#6 serviceenginner

serviceenginner

    Junior Member

  • New Members
  • 63 posts

Posted 24 October 2008 - 09:21 PM

what mech is in the machine ???
is the routing plug sat correct??
also is the white plug next to the routing plug sat on the pins correct ??

these are the main problems for not routing correct
also
enter test routine
and try testin the routing of the coins

#7 kems

kems

    Junior Member

  • New Members
  • 42 posts

Posted 24 October 2008 - 10:13 PM

I found the problem!, whoever had the machine before had been sodding around with the bit ontop of the pound hopper, the chute was faceing the wrong way!.

all working perfectly now!

Thanks everyone for the suggestions i am sure they wil help me out at some point :)




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users