You got both doors shut?
37 replies to this topic
#22
Nudges
-
- New Members
- 20 posts
Junior Member
Posted 18 November 2008 - 11:53 AM
yeah all doors are shut
#23
voodoomau5
-
- New Members
-
- 860 posts
Member
#24
Nudges
-
- New Members
- 20 posts
Junior Member
Posted 18 November 2008 - 11:58 AM
yeah 
cant do anything on it right now tho its just stuck with that message
cant do anything on it right now tho its just stuck with that message
#25
voodoomau5
-
- New Members
-
- 860 posts
Member
#26
Guest_DAD_*
Guest_DAD_*
-
- Guests
Posted 18 November 2008 - 12:01 PM
Stick it in test mode, and test to see if its firing coins out. IIRC its test ONE, press start then use the hold buttons for £1's & 20p's. As LukeyBizzle725 said you might have a coin stuck.
#27
Nudges
-
- New Members
- 20 posts
Junior Member
Posted 18 November 2008 - 12:09 PM
turning it off and on dident seem to work and when i press the button to go into test mode nothing happens how can i see if theres a coin stuck
#28
Guest_DAD_*
Guest_DAD_*
-
- Guests
Posted 18 November 2008 - 01:16 PM
The test mode you're looking for is 'coin flow test'.
Switch on with the door open
Press the green button on the mainboard 'once' (you should see 'stars' on the alpha display)
Press start and you should see 'coin flow test' on the alpha
Press the button to the left of start (on my machine its Exchange)
You should then be in Coin Flow test mode
Use Buttons 1 & 2 to test the coin mechs to see if it spits coins out
Switch on with the door open
Press the green button on the mainboard 'once' (you should see 'stars' on the alpha display)
Press start and you should see 'coin flow test' on the alpha
Press the button to the left of start (on my machine its Exchange)
You should then be in Coin Flow test mode
Use Buttons 1 & 2 to test the coin mechs to see if it spits coins out
#29
Nudges
-
- New Members
- 20 posts
Junior Member
Posted 18 November 2008 - 01:21 PM
Nothing happens when i press the Green button on the mainboard while its saying "Left to play" even with the door open
#30
voodoomau5
-
- New Members
-
- 860 posts
Member
#31
Guest_DAD_*
Guest_DAD_*
-
- Guests
Posted 18 November 2008 - 01:31 PM
Ah!Nothing happens when i press the Green button on the mainboard while its saying "Left to play" even with the door open
I'm not sure then.
I take it you've actually got coins in there? Also I would imagine that this machine has tubes and not a coin hopper. If so, then check the float sensors on the tubes - looks like a black switch about 6 inches from the bottom of the tube and fixed to the tube itself. Check the wiring and make sure nothing had come loose. That's about all I can think of really. Anything more than that and you'd be better off talking to one of the tech guys at the Mecca who know a hell of a lot more than me.
The MPU Mecca
Also I don't want to tempt fate, but it might be related to your battery problem.
Lastly, and its a bit drastic but you could try clearing the RAM (thus clearing the error). You can do this by shorting the battery but its not recommended. Maybe one the the Mecca guys could give you a safer way of doing this.
Good luck!
#32
Nudges
-
- New Members
- 20 posts
Junior Member
Posted 18 November 2008 - 01:40 PM
thanks anyway it has about £10.60 in there atm all the wires seem to be connected but the top of one of the tubes had come off but it dident seem to work when i put it back on either il try the mecca forums tho
#33
Guest_DAD_*
Guest_DAD_*
-
- Guests
Posted 18 November 2008 - 01:46 PM
It's too low on cash then. It really needs about £20+ in the £1 tube, that's exactly what the float level sensors are there for. It's basically telling you to fill it up a bit. I would imagine the 'CL' lamp is lit on the main glass - 'Coins Low'.
Don't know if this would work as I've never tried it, but you could try moving the sensor down till it's below the level of the coins - reset the machine and try again. Maybe I'm talking bollox though lol
Don't know if this would work as I've never tried it, but you could try moving the sensor down till it's below the level of the coins - reset the machine and try again. Maybe I'm talking bollox though lol
#34
Nudges
-
- New Members
- 20 posts
Junior Member
Posted 18 November 2008 - 02:18 PM
yeah il have to wait till i get more change and try it as cant really move the sensors as theres holes in the tubes for the sensor to clip into
#35
Nudges
-
- New Members
- 20 posts
Junior Member
Posted 18 November 2008 - 03:25 PM
Fixed now had to make it so the switches on the sensors were closed thanks for ur help 
#36
Guest_DAD_*
Guest_DAD_*
-
- Guests
Posted 18 November 2008 - 03:31 PM
I was on the right track then - wonders never cease lol
Glad you got it sorted
Glad you got it sorted
#37
Guest_fruit-machines-are-cool_*
Guest_fruit-machines-are-cool_*
-
- Guests
Posted 19 November 2008 - 12:54 AM
its a scorpion 2 machine i beleive i have the club version, for freeplay you have to keep the green button on the main board (on the back door) for about 5 secs, also your money goes into the tubes in the back of the machine. to get your money back you have to hold the green button again for bout 10secs to go into menu, then with the lit button "collect" coin output. something like that, and press the buttons to pulse the tubes.
***JUST SEEN THE SECOND PAGE, I ONLY SAW ONE PAGE LOL. SORRY, GLAD YOU SORTED IT. ***
***JUST SEEN THE SECOND PAGE, I ONLY SAW ONE PAGE LOL. SORRY, GLAD YOU SORTED IT. ***
#38
Guest_DAD_*
Guest_DAD_*
-
- Guests
Posted 22 November 2008 - 03:56 PM
Sorry LukeyBizzle725, I've only just seen your post while looking for something else lolWhat machine have you got DAD ?
I've got 2. A BFM SC2 Easy Money and a Barcrest MPU4 Top Tenner
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
