7 replies to this topic

[goetic]

Hi,
I have a real eachway nudge machine, but it wont power up properly( no lights on, but there is power to the board etc.), anyone know where i can get advice/ manuals etc on how to fix these problems? Or does anyone know anything about them on here.


any help would be greatly apreciated.


J

[martinmeu]

sounds like the power supply mate all you can do is check the fuses if there ok then im affraid you need another supply. look in the yellow pages and ring round should be able to get one. (good luck)

[goetic]

cheers martinmau... apreciate the help...

Trouble is PSU seems to be outputting fine... and also the main board looks ok... kinda wonderin if something is missing... trouble is without any schematics etc its hard to trace what!

[Bencrest]

Is this Each Way Nudge as in the '98 MPU5 Barcrest?
The one with the notes and coins in the middle?

[goetic]

no the very old 80's with the 1 to 10 column on the left of top board and two button, nudge up or nudge down..

[pete_w]

Try posting your your problem on my website. We have a few old machine techie experts who frequent the forums there. There are also System80 and MPS technical manuals in the resources section there which may be of some help.

http://www.fruitemu.co.uk

[impact]

power supply or lamp driver on the old mps 1 or mps 2 system bank of resisters and the transisters have blow or no com/ground/vcc line

[goetic]

cool... I'll check that out. Taking delivery of another each way nudger tomorrow that I know works... so going to compare the two.. etc and see if anything stands out wrong... I'll let u know how i get on

Goe