10 replies to this topic

[drn64]

Does anyone know if you can put JPM Club Cluedo £250 in free play mode, and if so how? I have tried opening the doors but the machine will not operate at all?

Thanks,
Daniel

[curlywill]

are you talking about a real machine or an emulation?

[drn64]

It's the emulator, I know it works with some machines, just wondered if it did with cluedo

[curlywill]

is this emu run in Mfme or jpemulator

[drn64]

This hasn't worked i'm afraid, the alpha display keeps cycling between bd open, cd closed but none of the buttons work. It's mfme 10.1

Edited by drn64, 18 December 2008 - 11:29 PM.
To respond to a more recent post

[curlywill]

i dont know about this machine in particular but with most if you open b door leave c closed then when the alpha display appears press start a few times then it should be in free play mode

[ploggy]

Instead of just pressing the "test" button, keep it pressed until you hear the bell noise. Then you'll be in free-play mode. If you just press it once, it will go into the test routines.

[ploggy]

Ah. Didn't know there was a MFME version. I was talking about the JPeMu version. If you want to get it into free/test mode on MFME, you need yo make a checkbox for button 56. Then press the test button on the top like normal. It looks like the inputs aren't hooked up properly on MFME when it comes to Impact machines.