AFTERNOON ALL:bigeyes20:
I HAVE BOUGHT A MOMERS MELTDOWN MACHINE BUT IT WILL NOT ACCEPT MONEY TO PLAY, I CAN PLAY IT ON FREE PLAY (BY BYPASSING THE DOOR SWITCH) BUT WHEN I PUT MONEY IN IT JUST DROPS IN AND DOESNT GIVE ME ANY CREDITS
EVEN IF SOMEONE CAN TELL ME SOMETHING TO TRY ILL GIVE IT A GO....
ANY HELP WOULD BE GREAT:bigeyes19:
6 replies to this topic
#2
Guest_tommy c_*
Guest_tommy c_*
-
- Guests
Posted 03 March 2009 - 02:44 PM
Make sure all the wires are plugged in right on the coin mech and check the routing plug is in. The routing plug will be the smallest plug out of them.could possibly be a wire has come out of place and try giving the mech a clean inside with pollish that sometimes works.AFTERNOON ALL:bigeyes20:
I HAVE BOUGHT A MOMERS MELTDOWN MACHINE BUT IT WILL NOT ACCEPT MONEY TO PLAY, I CAN PLAY IT ON FREE PLAY (BY BYPASSING THE DOOR SWITCH) BUT WHEN I PUT MONEY IN IT JUST DROPS IN AND DOESNT GIVE ME ANY CREDITS
EVEN IF SOMEONE CAN TELL ME SOMETHING TO TRY ILL GIVE IT A GO....
ANY HELP WOULD BE GREAT:bigeyes19:
#4
Guest_tommy c_*
Guest_tommy c_*
-
- Guests
Posted 03 March 2009 - 02:53 PM
It uses an hopper.Are the pay tubes connected?
#5
lincs1
-
- Banned
-
- 3803 posts
He Who Dares Wins
Posted 03 March 2009 - 03:23 PM
It uses an hopper.
correct tommy c it does use a hopper 1 point to that man
if all the above posts have been verified then the chances are the mech is fooked
which would mean a replacement
#6
gambogaz1
-
- Regulars
-
- 612 posts
Member
Posted 03 March 2009 - 03:43 PM
Have you bought it off Ebay?? As unless they're a registered company the pay unit has to be disconnected before people can sell it so may just need re connecting.
#7
GLENNSBAR
-
- New Members
- 4 posts
Junior Member
Posted 03 March 2009 - 04:02 PM
Thanks guys
in reference to the mech being fooked i bought a new one but still the same i will try the other points tonights
thanks for taking the time to respond
in reference to the mech being fooked i bought a new one but still the same i will try the other points tonights
thanks for taking the time to respond
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
