24 replies to this topic

[lee12]

hi, i have just bought my first machine and im trying to work out how to turn the volume down on it, its a barcrest ooh ahh dracula £15jp i have tried the settings useing the refill key but cant seem to find a way to turn the volume down as its giving me a headache:wacko:

any help would be apriciated, ta.

[robertmckenzie25]

when you open the top door and it resets it should say door open if so press the test button and it should give you options press start and find the volume option and it should work if not try opening both doors and use your refill key that might work

[Bencrest]

hi, i have just bought my first machine and im trying to work out how to turn the volume down on it, its a barcrest ooh ahh dracula £15jp i have tried the settings useing the refill key but cant seem to find a way to turn the volume down as its giving me a headache:wacko:

any help would be apriciated, ta.

Assuming it's the MPU5 Ooh Aah Dracula, it *should* be accessed through the refloat key.

You have to hold in the middle hold button, then turn the key, and it should say something like 'VOLUME 1 > 20 = 10' on the display, you need to use the hold buttons to change the value, and then turn the key back and remove it to set the volume.

If it's the MPU4 rebuild of the machine, which I believe was made by BWB, then I'm not 100% sure as I've not worked on MPU4 BWB stuff, it may well be in the Test mode routine as shown above.

[lee12]

cheers for the help, sorted it by holding the middle hold and turning the key, one more question, does anyone know if theres a setting where i can make the lights flash when the machine is just sat there, as the lights are on all the time.

[lincs1]

cheers for the help, sorted it by holding the middle hold and turning the key, one more question, does anyone know if theres a setting where i can make the lights flash when the machine is just sat there, as the lights are on all the time.

you will need to find the attract mode dip switch on the main mpu board

all the dip switches numbered 1 to 8 should be in the off position

[lee12]

ta now i know what switches you mean, bt ive only gone and flicked the wrong switches and now it wont do anything at all

i have messed about with the switches on the outside top right corner of the mpu board and the machine has gone dead, theres just a few green lights on inside the machine.

anyone?

[lincs1]

ta now i know what switches you mean, bt ive only gone and flicked the wrong switches and now it wont do anything at all

i have messed about with the switches on the outside top right corner of the mpu board and the machine has gone dead, theres just a few green lights on inside the machine.

anyone?

flick the switches back to how it was.

the switches u need to play with is under the % key on the programme card

[lee12]

flick the switches back to how it was.

the switches u need to play with is under the % key on the programme card

yeah i cant remember how they was so i guess im f****d?

[lincs1]

yeah i cant remember how they was so i guess im f****d?

just flick each 1 till it comes alive again, simples

[lee12]

still no luck

ill keep trying but the machine just isnt doing anything at all, do the switches have to be turned on/off in a certain order?

[lincs1]

still no luck

ill keep trying but the machine just isnt doing anything at all, do the switches have to be turned on/off in a certain order?

does your machine have a % key plugged in?

[lee12]

does your machine have a % key plugged in?

no it doesnt

[lincs1]

no it doesnt

right flick dip switch number 8 to the on position

then restart the machine

[lee12]

its still not having any of it thanks for trying to help me mate

[lincs1]

its still not having any of it thanks for trying to help me mate

right don't touch dip switch 8 leave that as is.

right flick dip switch number 3 then restart the machine

[lee12]

nope still no luck

[lincs1]

nope still no luck

flick dip switch number 2

then restart the machine

[lee12]

its still dead

[lincs1]

its still dead

right flick number 4 then restart the machine

if that doesn't work then it seems to have a problem if you haven't touched anything else