Spotted Dick Club Problems
Started by alanshave, Jun 18 2009 08:22 PM
11 replies to this topic
#1
Posted 18 June 2009 - 08:22 PM
Hi guys.
Thanks in advance for any help you can give me.
Have a Global Spotted Dick £250 jackpot which was working fine in my garage until I decided to put it in a transit and bring it 15 minutes up the road.
Only I changed was the plug on the end of the kettle plug, same fuse etc.
Now when I turn it on it makes a dull thud sound and not much else is happening - no error messages or alarms I can see/hear. Power doesn't seem to be a problem.
Anyone any ideas? Anything that can often happen when you transit a fruity?
Thanks in advance for any help you can give me.
Have a Global Spotted Dick £250 jackpot which was working fine in my garage until I decided to put it in a transit and bring it 15 minutes up the road.
Only I changed was the plug on the end of the kettle plug, same fuse etc.
Now when I turn it on it makes a dull thud sound and not much else is happening - no error messages or alarms I can see/hear. Power doesn't seem to be a problem.
Anyone any ideas? Anything that can often happen when you transit a fruity?
#2
Posted 18 June 2009 - 08:34 PM
Not sure if this info will help anyone.
On the MPU Board only LD3 and LD5 are lighting on startup and remaining lit.
On the power supply unit LD6 isn't coming on (-12V) - perhaps this is the problem???
On the MPU Board only LD3 and LD5 are lighting on startup and remaining lit.
On the power supply unit LD6 isn't coming on (-12V) - perhaps this is the problem???
#3
Posted 18 June 2009 - 09:23 PM
the 12v fuse is gone or not in contact
see if u can have a look
see if u can have a look
#4
Posted 19 June 2009 - 07:17 PM
Excuse me for sounding like a tube but will the 12V fuse be one of the 3 black tubes removable from side/back of the PSU unit?
#5
Posted 19 June 2009 - 07:29 PM
black ?
they should be clear ?
can u see the fuse wire inside
they should be clear ?
can u see the fuse wire inside
#6
Posted 19 June 2009 - 08:09 PM
black ?
they should be clear ?
can u see the fuse wire inside
Im a total n00b when it comes to real machines..but i spose if they are black instead of clear they defo have blown ?
Mmmmmm...Sandy ive 'ad her ye know.
#7 Guest_tommy c_*
Posted 19 June 2009 - 08:18 PM
When he says black tubes i think he means the the screw in housingblack ?
they should be clear ?
can u see the fuse wire inside
#8
Posted 20 June 2009 - 09:07 AM
Sorry, yeah I meant the housing is black. Removed all 3 on the psu housing and can't see any breaks in any of the wires.
It's a Stadium RA8387.
It's a Stadium RA8387.
#9
Posted 20 June 2009 - 09:16 AM
.....If any fuses are broke, wrap a tiny piece of tin foil round the whole fuse, stick it back in, vola....fixed..............................................................................!!!!!!AT YOUR OWN RISK ONLY, I DONT WANT TO BE RESPONSIBLE FOR HOUSE FIRES, LOL!!!!!!!
#10
Posted 20 June 2009 - 11:02 AM
The dull thud is coming from the PSU itself. Followed by what sounds slightly like a hissing sound.
Perhaps I just have to replace the PSU?
Perhaps I just have to replace the PSU?
#11
Posted 20 June 2009 - 01:35 PM
sounds knackerd mate best be safe then sorryThe dull thud is coming from the PSU itself. Followed by what sounds slightly like a hissing sound.
Perhaps I just have to replace the PSU?
#12
Posted 20 June 2009 - 03:03 PM
You could well be right.
Next thing will be to work out which PSU I need to replace it.
Next thing will be to work out which PSU I need to replace it.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users