3 replies to this topic

[paulypj]

I own 'Thriller' fruit machince (crystal JPM impact machine)
To access 'free-play' mode you need to open the rear door and hold down the 'test' button on the main board.
Is there another way to get into this mode without having to access the rear door as its abit annoying having to move the machine everytime.

I know a simple fix would be to move the machine away from the wall, or get some money! but just wondered if there is any other ways.

cheers for reading

[james2k2]

I'm unsure as to what the MPU's look like in your machine but if it's anything like my Scorp 4 board, you could get a soldering iron and wire a switch up to it on the solder side with some wires and then put the switch elsewhere. However, i've found that on my scorp 4, if the top door isn't open (properly) the test switch doesn't function so you could have this problem too. Good luck and be careful with any soldering!

[skabaz]

the answer is unfortunatly no unless you want to start butchering the machine.

so i would still say no.

baz

[lincs1]

a set of 4 castors would be your best bet if pulling a machine back n fourth is abit of a struggle for u.

cardie may have some roller skates he could sell u. pmsl