9 replies to this topic

[martyn]

Hi all,

Can anyone help, I have got a barcrest psycho cash beast, and one of the black reel brackets has broke, marked 'starpoint' and is 40mm high and 65mm wide.
Some time ago bought one from ebay, but it turned out to be too big, never got round to returning it! So i assume they come in diferent sizes, hence the measurements above.

Anybody have one or more for sale or any guidance to a source would be very much appreciated.

regards,
Martyn

Thanks matty for quick reply, have uploaded pic of busted support, (note both feet have broken off) Martyn

Attached Files

•  Photo0007.jpg   77.17KB   17 downloads

Edited by martyn, 06 July 2009 - 09:46 PM.

[mattyballs]

stick a piccy of it here if you can mate..ive got two barcrest reel sets in my spares..one came from a machine of about the same age

[cardie]

if you cant get one off ebay probs best asking around a few arcade if they have any spare and if not just ring starpoint your self


if they still produce the brackets though

[mattyballs]

just checked both sets of mine ..and my sets are twins...


BUT THEY ARE THE LARGER SIZE..DAMN...

best thing to do is nab a knackered barcrest which is right under yer nose distance wise off ebay..then either use it as spares...youl probs get a profit or money back selling the other bits too

soz m8..(that was unfortunate)

Edited by mattyballs, 07 July 2009 - 10:01 AM.

[stanmarsh14]

You could also try the guys at The Mecca, and see if they can help in any way (Link is on the left under FME Sites)

[martyn]

just checked both sets of mine ..and my sets are twins...


BUT THEY ARE THE LARGER SIZE..DAMN...

best thing to do is nab a knackered barcrest which is right under yer nose distance wise off ebay..then either use it as spares...youl probs get a profit or money back selling the other bits too

soz m8..(that was unfortunate)

Thats a bummer! Anyway, Thanks Matty for looking and everyone else so far who has replied, I will bide my time, with a bit of luck someone else might have a spare!
If I bring home another machine knackered or not the wife will leave me........hmm I wonder!

[roderz]

there should be a part number stamped on it somewhere, or on one of the un-broken one's

[martyn]

Hi all,

Quick update, got a lead from roderz to contact his mate who had some brackets, bought one fitted it today, all good.
Thanks to all who replied to my post

Martyn

[mattyballs]

Hi all,

Quick update, got a lead from roderz to contact his mate who had some brackets, bought one fitted it today, all good.
Thanks to all who replied to my post

Martyn

well done m8....another satisfied customer....

[roderz]

Hi all,

Quick update, got a lead from roderz to contact his mate who had some brackets, bought one fitted it today, all good.
Thanks to all who replied to my post

Martyn

Nice to hear you got it sorted.