4 replies to this topic

[hot dazzer]

Hi Im having a promblem this machine, it runs on an Sco 5 mpu.

the problem at first was coin mech error, error would not go, but machine worked fine in test will did now im getting a flashing red led light on the mpu and machine dont boot up ive replaced both the MPU and Program card to no luck

Any Other Ideas?

Im i right in thinking if I missed a mpuy loom as long as the program card is fitted the machine should bo something

[cardie]

are you sure its in properly



the machine should begin to boot up if it is

if it isnt the game card could be fecked

[hot dazzer]

Game card is in correct even tried a new card card with the eproms still no luck

[skabaz]

please check you have put the eproms in correctly because you get a red flashing light if the chips have been put in the wrong way round.

baz

[hot dazzer]

fitted two new eproms high and low and now im getting error 97 wrong snd err (wrong sound prom fitted) after that then it comes up with error 41 security,