1 reply to this topic

[beechcraft]

hi all.
Got a fault on an old maygay gladiators. just replaced the M1A board and it worked fine for a week.
Now on initialisation i get l3 constantly lit which doesnt allow the psu to fully switch display says 6.0 meters missing yet all meters read 40 ohms all wiring buzzed through and ok
the +12v lamp also doesnt light but i guess it wouldnt until l3 goes out.
notice also the lamp at side of top meter is also light
I dont have manual for this machine so any help would be greatly appreciated.
andy

[gavafcb]

Try hitting it with a sledghammer! Lol