Jump to content


Photo
- - - - -

jpm gamebox isa card not found fault


  • Please log in to reply
6 replies to this topic

#1 jbm1967

jbm1967

    Junior Member

  • New Members
  • 1 posts

Posted 16 August 2009 - 11:10 AM

hi can anyone help? i have a gamebox and has developed a fault saying "isa card not found contact engineer". this was intermitent but now does it evry time. it all seems to load as normal then this comes up and stays on the sreen. any ideas what the problem is? if i need a new isa card where can i get one? thanks in anticipation of your help.

#2 Guest_DAD_*

Guest_DAD_*
  • Guests

Posted 16 August 2009 - 11:19 AM

I posted a manual for the 'who wants to be a millionaire' JPM gamebox in this thread, dunno if it might help:

http://www.fruit-emu...n-game-box.html

#3 skabaz

skabaz

    Engineer of the World

  • New Members
  • PipPipPipPipPip
  • 2778 posts

Posted 16 August 2009 - 02:28 PM

sorry to be the bearer of bad news but this happens on nearly all proteus cabinets and is why jpm stopped making them.the pc's are crap!!!


you will really need to source a company that sells spares for these machines but good luck as most suppliers got rid of them all due to the hassle and cost of getting them fixed.

baz

#4 bluepoint

bluepoint

    Junior Member

  • New Members
  • 1 posts

Posted 20 September 2009 - 01:28 PM

The ISA card is the sound card on the PC board. Remove the card and reinsert or wiggle the cable that is plugged into it.

#5 campaz

campaz

    Junior Member

  • New Members
  • 34 posts

Posted 20 September 2009 - 02:08 PM

we have a lode of protus machines and baz is right there an arse to fix. its gona be either your pci card or the motherboard that gone. cud even be the hardrive. be easier to sell the machine for scrap to be honest if you havnt got spares to fix it

#6 skabaz

skabaz

    Engineer of the World

  • New Members
  • PipPipPipPipPip
  • 2778 posts

Posted 20 September 2009 - 03:14 PM

The ISA card is the sound card on the PC board. Remove the card and reinsert or wiggle the cable that is plugged into it.


if only it was as easy as that !!!


baz

#7 heny

heny

    Newbie

  • New Members
  • 2 posts

Posted 13 January 2012 - 11:59 AM

can someone repost the link for manual as that above doesn't seem to work, page error!




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users