hi can anyone give me some advice/help!, just got new eclipse mpu for maygay money laundry machine but my flash module has dumped so iv been told, can anyone tell me step by step what this means and what i need to do to get the machine working normaly again, the flash card that came with new mpu is for different machine (rock&roll) and is a different setup to money laundry, any help would be great thanks
2 replies to this topic
#2
skabaz
-
- New Members
-
- 2778 posts
Engineer of the World
Posted 13 October 2009 - 09:18 PM
sorry to be the bearer of bad news but since barcrest bought over maygay a few years back they did not support maygay machines in the cabinet that you have.
its gonna be difficult to get this program again unless someone out there has the rom dumped on their pc and willing to stick it on a flash card or email you it.
baz
its gonna be difficult to get this program again unless someone out there has the rom dumped on their pc and willing to stick it on a flash card or email you it.
baz
#3
roderz
-
- New Members
-
- 222 posts
<--+-->
Posted 14 October 2009 - 10:54 AM
You could try putting the your old flash module on the new board,
this should verify if it is faulty or not, if it's not then it should still have the program on it and boot your machine.
the game is stored on the eproms on the reverse side of the module.
or
If you do manage to get the program file one point to note is that your flash card needs to be formatted as FAT not FAT32 for it to be seen.
this should verify if it is faulty or not, if it's not then it should still have the program on it and boot your machine.
the game is stored on the eproms on the reverse side of the module.
or
If you do manage to get the program file one point to note is that your flash card needs to be formatted as FAT not FAT32 for it to be seen.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
