Jump to content


Photo
- - - - -

Maygay Simpsons Fault Codes Please HELP


  • Please log in to reply
6 replies to this topic

#1 cooperman

cooperman

    Junior Member

  • New Members
  • 5 posts

Posted 11 December 2009 - 10:21 PM

Have recently got very early simpsons machine and need help with fault codes, machine powers up then alarm sounds showing 1.3 20p FAULT,machine is currently empty of all coins, any coins that are put in go straight through with no credit . If it helps it uses the m1a/m1b microprocessor unit. Also the machine has displayed SIMPSONS 2.1 If anyone can help it would be appreciated.

#2 skabaz

skabaz

    Engineer of the World

  • New Members
  • PipPipPipPipPip
  • 2778 posts

Posted 12 December 2009 - 03:06 PM

sounds like you have a faulty coin mech.

what type of coin mech is in the machine?

baz

#3 cooperman

cooperman

    Junior Member

  • New Members
  • 5 posts

Posted 12 December 2009 - 03:27 PM

I am told that it has a Mars coin mech & a C435 coin control

#4 skabaz

skabaz

    Engineer of the World

  • New Members
  • PipPipPipPipPip
  • 2778 posts

Posted 12 December 2009 - 04:30 PM

it will either be a mars coin mech or a coin controls coin mech.

have a look up where the coins go in and the the mech will say what type it is.

baz

#5 cooperman

cooperman

    Junior Member

  • New Members
  • 5 posts

Posted 16 December 2009 - 09:06 PM

Hi baz, sorry for delay in getting back to you.Have looked at coin mech and found that its a Mars ME126 separator module with another mech above it that has two small circuits to it.Powered the machine up today with back door open {no alarm & no codes}so put some coins in but still does not register credits. Any ideas?????

#6 cooperman

cooperman

    Junior Member

  • New Members
  • 5 posts

Posted 07 February 2010 - 07:05 PM

:nah:Hi all,hope you can help me revive this old favourite. Lots of probs so here goes!
Mars ME126 coin mech sorts coins but no credits
Nornal game mode...won't play. Demo mode...won't play.
Can't get into test sequence {allthough have tried by using manual from the same Maygay Eastenders machine} still no joy.
nudge pot & Homers pay cheque are not lit {00 & 000}
have changed coin mech...{no difference}
have also put lots of 20p & 1.00 coins in {no difference}
have checked battery...good condition & correct voltage
When machine is powered up alarm sounds & 1.3 20p fault is displayed...have waited for it to clear but still cant play ....
Should i change the MPU {M1b type} ???? just to be shure ,this is the early Simpsons, not the one with the blue frame or Homers meltdown or the duff beer guide.If anyone can help me & my boy {the Simpsons fan} we would be very greatfull. Regards Cooperman.

#7 cooperman

cooperman

    Junior Member

  • New Members
  • 5 posts

Posted 09 February 2010 - 05:33 PM

Does anyone in the Cheltenham area have a spare M1B that i could borrow or buy. I am still trying to sourse the problem with my early Simpsons as mentioned earlier.Cheers Cooperman.




2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users