2 replies to this topic

[peeknpoke]

Hi all,
I have a cops n robbers bellfruit machine which I saved a couple of years ago from an old cafe.
I managed to get it working - sadly the only fault being the machine had been broken into at the back (possibly from some scamps trying to see if there was any money in there)

Anyway I powered up the machine last week after a few months not doing so...and nothing.
All the lights come on the board at the back inc the various areas of the machine that I think indicates power is getting to these areas...yet nothing works

The red light on the motherboard flashing slightly if thats anyhelp

Any ideas would be very greatful!

Thanks,
Lee

[skabaz]

if the gamecard is connected correctly then i would assume that the mpu is stuck in reset.you may need a replacement scorpion 1,2 or 4 board depending on which version of cops and robbers you have.

baz

[Sparkz]

baz's reply sounds worth trying

also, maybe there could be a battery leak? many people have had problems with their machines after leaving it for months without powering it up, then they find out the batterys leaked :S