6 replies to this topic

[kacee1981]

i have brought a 60th anerversary edition monopoly friut machine i turned it on and pressed the red button 4 ten sec and the machine starts up the a messege comes up,it says,cd-open-78.78..i dont know how to get it runing?am i doing something wrong or is there something wrong .i need help.this is my 1st machine and it ant started well...any help much appriciated

[skabaz]

that message means the cash door is open and its running on 78%

what happens when you close all the doors?

baz

[kacee1981]

soory baz but iv just got it i have no clue.where and how do i do this.is there any way i can talk to u through msn cus im a real jackass when it comes to electrical things my msn is on and my email is Sign In. i will worship the ground you walk on if u can help me fix my problem.thank you.kacee1981 kacee1981@hotmail.co.uk
o by the way it flashes between cd and bd???

Edited by kacee1981, 16 January 2010 - 07:30 PM.

[stanmarsh14]

Deffo a door issue, or one of the door switches remaining open.

CD = Cash Door (One below the payout tray) BD = Back Door.

Got an Impact v1, which is the same tec that yours uses.

Ensure that the door below the payout tray, is fully closed, and wait around 30 / 45 seconds for the machine to reset.

If it works, that message you got before, should go, and change hopefully to zero credits / bank.

If not, then you may have a faulty door switch issue.

Just for reference, user guide here for another impact game. Whilst the game info will not relate to your machine, the hardware section (The most important bit), will basically tell you enough, how to fault find, fix faults, and generally maintain the machine.

Attached Files

•  96308-JPM Impact Cracker Operation & Service Manual.zip   1.39MB   6 downloads

[fruitman69]

Yeah and baz says the 78.78 means target 78% and its currently 78% away from target eg its prolly ram cleared and is on 0% payout


after a few hundred through it it would start saying things like 78.01 eg + or - 1% from 78%

Just for those who didnt know thats how it is.

[stanmarsh14]

Pic here of what you need to look for.

When this switch is closed (Pressed in), assuming the back door (BD) is also closed, the machine will start in normal play mode.

Attached Files

•  GUAB12.jpg   83.12KB   8 downloads

[kacee1981]

thank you!!
i got it working,the senser was'nt in contact properly a bit of tape on back door to clos did the trick.cheers for the help guide.ill have to study:wideeyed:
kacee1981