8 replies to this topic

[BadBoyBushy]

Hi,
First, sorry if this is in the wrong area (please move it if needed). New to this forum, and will need to get to know where to post correctly.

I have a Red Gaming Lock 'N' Load machine, which I have decals for up to £2000 jackpot (although the machine says £1000), but I cannot seem to be able to set it above £250. All I get is error code 91 00 despite the dil switches being correct.
Below are photos of the instruction manual, the settings shown inside the machine, plus I have shown the MPU5 board (switch settings on this may not be set correctly. The photo is intended to show the type of mpu board).

Jackpot switch settings inside machine (showing £1000)


Instructions showing switch settings (showing £2000)





Error code list


Do I need to have a percentage key and price key fitted for the £1000, or £2000 jackpot to be set? Or can anyone suggest what the problem could be?
I'm not to techincal on these machines, as I only have it as a savings machine, rather than serious play, but it would be nice if I could set it to the £1000, or £2000, so could any questions you post in an attempt to help me, be as non techincal as reasonably possible (i.e. I wouldn't know what an MPU or stake key was if I hadn't already been told).

[RUKI2909]

sorry mate looks like the % key is missing and the stake key from the photo

[nails]

it most probably needs a totally different game card to enable this, would have thouht bazbeep could help us here ?

[skabaz]

probably a software update is needed for anything above the £250 jackpot.

baz

[fruitman69]

Hi,
Firstly the JP option switches are on Bank 1 which is on the MPU5 and not Bank 2 which is what you show in the pics.

Secondly im with baz on this that you will need a "casino" set of ROMS to run the £1000 version and maybe the £500 one.

As for £2000 im not sure they actually went ahead with that stake on this game, even tho they show it as an option.


I hope that helps.

[roderz]

^^ wot he said.

[BadBoyBushy]

Hi,
Firstly the JP option switches are on Bank 1 which is on the MPU5 and not Bank 2 which is what you show in the pics.

Secondly im with baz on this that you will need a "casino" set of ROMS to run the £1000 version and maybe the £500 one.

As for £2000 im not sure they actually went ahead with that stake on this game, even tho they show it as an option.


I hope that helps.

Thanks to everyone for your replys.

I thought it may be a software thing, but as the dil switch settings are printed inside the machine, I thought that it would go to at least £1000.

The photo of the bank 2 switches was more to show the mpu. I located the jackpot ones and set them correctly which was when I got the error code.
Tried setting the price of play to 50p as well, but still did not work. In fact I cannot set the price above 30p (which is the max shown on the coin mechanism).

Is a software update something that can easily be done at home, or should I just leave it at £250, forget the other decals and enjoy the machine as it is?

[skabaz]

you wont be able to get an update for this machine now as barcrest removed loads of files from their trade website a wee while ago and this machine would be one of them.

btw it plays shit on £1000 anyway.

baz

[dudubom]

this is a very interesting machine, congratulations!