17 replies to this topic

[tiptop]

Hi is was wondering if anyone could help me please i have a Bell-fruit machine that keeps saying PAY UNIT ERROR 17 everytime i turn it on ive checked the hopper for a jam but it doesnt look like there is one does anyone know what is should do? thanks

[wildcat]

Hi is was wondering if anyone could help me please i have a Bell-fruit machine that keeps saying PAY UNIT ERROR 17 everytime i turn it on ive checked the hopper for a jam but it doesnt look like there is one does anyone know what is should do? thanks

if the drum inside the turns ok by hand and theres no coin jam it may be the motor on the hopper has died.
have you tried putting your machine into test mode and tried dumping the hopper? its worth trying. or try turning the drum the other way by hand.

[skabaz]

i have replacement hoppers if needed.

baz

[pricey2007]

it could be an mpu error and not clearing the fault on boot up, have you ram cleared the mpu by shorting out both sides of the battery on the mpu with the power off??, try that.

i've got hoppers and scorp 4 if needed.

[impact]

9 or 10 pin serial yellow most common replace hopper

[cardie]

9 or 10 pin serial yellow most common replace hopper

I had a problem with this with no coin jams on an MPU5, turns out the 34v fuse had gone. In other words check all the LEDs are lit on the board.

[impact]

On mpu 5 Not a scorp 4

[cardie]

On mpu 5 Not a scorp 4

Aye, just saying if it brings up a randum problem like that and everything else seems to be working its worth checking.

[impact]

But it`s a scorp 4 a mpu fuses are easy. I know what your saying fella i should do after over 17 years doing this pish© lol

[cardie]

You've been doing it longer than Cardie has been alive

bj

Less of the cheek now please Im still learning.

[skabaz]

But it`s a scorp 4 a mpu fuses are easy. I know what your saying fella i should do after over 17 years doing this pish© lol

i'm coming up for 17 and a half years in the bizz too!!

baz

[impact]

I know you have baz done all the same crap too jukeboxes ect and then service manager ect

[roderz]

Oh dear, well I coming up to my 20th year!!
shame - where the hell did it go?

[skabaz]

Oh dear, well I coming up to my 20th year!!
shame - where the hell did it go?

who do you work for roderz.pm me if you prefer.

baz

[bruciebaby25]

i have replacement hoppers if needed.

baz

hello mate im after one!!!! how much were you looking for one?

[DeJaVu]

Have you managed to sort it yet... cleared dwn the error..
Its not funny............

[The Reel King]

Hi is was wondering if anyone could help me please i have a Bell-fruit machine that keeps saying PAY UNIT ERROR 17 everytime i turn it on ive checked the hopper for a jam but it doesnt look like there is one does anyone know what is should do? thanks

hi.

is it a compact hopper?

have you stripped it so u just have motor ect.

definatley no coin jammed?
all pins ok and looms plugged in?
no break on loom to MPU?

-----------------------------------

will the machine set up with door open?
can you payout in test mode?
is machine fitted with 10p hopper? (even if inactive)