Extreme Gaming Doctors And Nurses

#1 DJDONKEY

Member

New Members
133 posts

Posted 02 July 2010 - 09:44 AM

Hi All

Just picked up an Extreme gaming doctors and nurses running on MPU5 (Barcrest genesis cab)
It came with the decals to change the jackpot.

There were no keys in the program board. I have tried a variable percentage and stakes & prizes key but they have no effect. It seems to be stuck on £100 jp, 5p play which is very boring! The keys I have tried are not faulty as they come from a working scorpion 4 machine.

I have also tried getting the machine into test (red button on program module, then switch under the reel board) but to no avail.

I'm familiar with Scorpion 4 and MPU4, but this is the first MPU5 machine i've had. Am I missing something?
Is it likely a fault with the MPU board or program module. Software version is 1.2 if that is any help

Appreciate any advice
Phil.

#2 Guest_Tommy c_*

Guests

Posted 02 July 2010 - 09:55 AM

Hi All

Just picked up an Extreme gaming doctors and nurses running on MPU5 (Barcrest genesis cab)
It came with the decals to change the jackpot.

There were no keys in the program board. I have tried a variable percentage and stakes & prizes key but they have no effect. It seems to be stuck on £100 jp, 5p play which is very boring! The keys I have tried are not faulty as they come from a working scorpion 4 machine.

I have also tried getting the machine into test (red button on program module, then switch under the reel board) but to no avail.

I'm familiar with Scorpion 4 and MPU4, but this is the first MPU5 machine i've had. Am I missing something?
Is it likely a fault with the MPU board or program module. Software version is 1.2 if that is any help

Appreciate any advice
Phil.

There should be a bank of 8 dip switches on the mpu5 board,on most clubbers you change the prize and stakes with them.

#3 DJDONKEY

Member

New Members
133 posts

Posted 02 July 2010 - 10:09 AM

There should be a bank of 8 dip switches on the mpu5 board,on most clubbers you change the prize and stakes with them.

Hi Tommy

They only change the percentage and a few other options, not the prize and stake. I have attached a photo ( I took the keys out for clarity!)

Attached Files

MPU5.JPG 2.43MB 68 downloads

#4 Guest_Tommy c_*

Guests

Posted 02 July 2010 - 10:35 AM

Hi Tommy

They only change the percentage and a few other options, not the prize and stake. I have attached a photo ( I took the keys out for clarity!)

The only other thing i can think of is the software is locked to 5p/£100,theres some roms in the emulator which do the same thing so you can't change the prize stake or percentage.It would explain why you variable keys aint working.

#5 captainhaddock

Layout Designer

Layout Creator
741 posts

Posted 02 July 2010 - 10:59 AM

I think that switch bank 1 is used to set the jackpots and stakes, I can only see switch bank 2 on your pic,on an emulated clubber dips 3,4,and 5 sets the jackpot and 6,7,and 8 sets the stake,so if you can find bank 2 try setting 6,7,8 to the off position and see if it changes the stake to 30p.

Dave.

jemdna likes this

#6 stanmarsh14

Sado-masochist

Gold Supporters
3120 posts

Posted 02 July 2010 - 11:29 AM

Best looking at the MPU5 user guide, and see what is needed to be done

http://www.fruit-emu...s&showfile=2999

Also, stakes / prizes keys settings guide here

http://www.fruit-emu...e-key-settings/

As the mpu has sockets for stake / prize keys, they should work, but you may need to check some of the dips on the 1 - 8 bank pointed out earlier, and turn to OFF.

Killing the scene since 2009

#7 DJDONKEY

Member

New Members
133 posts

Posted 02 July 2010 - 01:48 PM

Horray!!

Right at the bottom of the MPU is switch bank 1 which obviously overrides the stake key.
All sorted now.

Thanks to everyone who took the trouble to reply

Phil.