4 replies to this topic

[crofty1379]

hi guys just need a bit of help if anyone can i just got the old classic mab machine needed repairing put new coin mech replaced all the bulbs and psu all working spot on except just above the reels it has a strip light bulb to light reels up i have replaced this but it wont come on any ideas all or has any one got a manual they could email me thanks andy

[fruitman69]

A stab in the dark but just trace the wiring back to the power suply or mpu and make sure there wired in and in the correct place,also look for any bad connections loose wireing.

Have you tried replacing the "starter" as well thats the white cylindrical looking thing about 1.25 inches.

[crofty1379]

gonna have a look at the wiring loom tonight if that ok i will replace the starters cheers for advice will let u no tomorrow guys

[crofty1379]

tommy c u was right m8 cheers someone for some reason disconected the wires for what reason i dont no as it is the main lighting cheers for the help guys