6 replies to this topic

[partytime2]

Hi on my up n over machine i have started to get a couple of errors and was wondering if anyone knows how i can fix them they are

Alarm 23-a6 Reel C spin Missed opto

and

Alarm 23-a5 Reel C setup seek tab failed

any help is much appreciated many thanks

[cardie]

if that fails the tab sensor has gone, give us the numbers off the tab and we will find you a new one!

[partytime2]

Thanks guys i will give that try tomoz after work and let you know how i get on thanks

[partytime2]

Thanks guys i will give that try tomoz after work and let you know how i get on thanks

sorry for delay in the reply i cleaned it but still keeps coming up with the error!!!! I tried looking for the numbers but im not sure where to look for the tab numbers???

[cardie]

sorry for delay in the reply i cleaned it but still keeps coming up with the error!!!! I tried looking for the numbers but im not sure where to look for the tab numbers???

does the machine have red LEDs on the reels at all?

[Starleisure]

Counds like the opto needs a good clean on the reel,it's the little black tab on the inside of the reel housing.best bet wouldbe to use a dusting rag and gently clean it,and that should solve your problem if dirt and dust is coverin it.

Just to add on this post.

Using a cotton bud on the opto can help get in as its fiddly and the best way to see if its really an opto fail is try changing the 3rd reel opto to another reel and see if the fault moves.

Another could be the tab the opto reads has moved or been knocked somehow.

Best wishes
Stu.