Hi all, haven't posted on here for a while, but need a little help (again)! Fancied a change, so decided to sell my Club Crazy Fruits, and got hold of a Club Psycho Cash Beast pretty cheap, not bad condition either. However, after a few days of playing it has now developed a pretty annoying fault:-
The machine display reads:- '250 DPI 86 (or sometimes reads 84) in.....' and counts down from 4 to 1, then restarts/resets itself. This happens randomly, and occurs with/without doors open etc. When it occurs, the status lights on the MPU5 board, and all other boards, all stay green, with no indication of a fault. (I think that 250 means Jackpot, DPI means 20p/10p play, and 86/84 is the percentage?)
There is also no error message saved in the error log, either.
Any help would be much appreciated!
(Also, any ideas where I could get hold of the engineers manual for this (Genesis/MPU5), either download or paper - I have the basic Barcrest one, but it has very little info in it regarding schematics etc for checking voltages, error codes etc).
Cheers in advance!
5 replies to this topic
#2
Wayne100
-
- New Members
- 11 posts
Junior Member
Posted 12 October 2011 - 08:32 PM
Forgot to say, sometimes before restarts/resets, but after the above is displayed, it also says 'reset DCPC'.Hi all, haven't posted on here for a while, but need a little help (again)! Fancied a change, so decided to sell my Club Crazy Fruits, and got hold of a Club Psycho Cash Beast pretty cheap, not bad condition either. However, after a few days of playing it has now developed a pretty annoying fault:-
The machine display reads:- '250 DPI 86 (or sometimes reads 84) in.....' and counts down from 4 to 1, then restarts/resets itself. This happens randomly, and occurs with/without doors open etc. When it occurs, the status lights on the MPU5 board, and all other boards, all stay green, with no indication of a fault. (I think that 250 means Jackpot, DPI means 20p/10p play, and 86/84 is the percentage?)
There is also no error message saved in the error log, either.
Any help would be much appreciated!
(Also, any ideas where I could get hold of the engineers manual for this (Genesis/MPU5), either download or paper - I have the basic Barcrest one, but it has very little info in it regarding schematics etc for checking voltages, error codes etc).
Cheers in advance!
#3
Guest_Tommy c_*
Guest_Tommy c_*
-
- Guests
Posted 12 October 2011 - 08:35 PM
It could be the batteries flat mate which keeps the ram memory.
#5
Wayne100
-
- New Members
- 11 posts
Junior Member
Posted 15 October 2011 - 09:09 PM
Sorry for the late reply, been away working. Managed to sort it - faulty DIP switch on MPU5 board, hence switching and resetting between different percentages. Cheers for the help, though!
#6
FruitBash
-
- Regulars
-
- 430 posts
Triple 7 Engineer
Posted 16 October 2011 - 01:56 AM
Sorry for the late reply, been away working. Managed to sort it - faulty DIP switch on MPU5 board, hence switching and resetting between different percentages. Cheers for the help, though!
Glad you got it sorted, and thanks for the update! Might be useful for someone else with the same error, never know!
<div><strong>Forum aimed specifically at Barcrest Triple 777 fruit machine</strong> - <a data-ipb='nomediaparse' href='<a href='http://www.supremeso.../t7/index.php''class='bbc_url' title='External link' rel='nofollow external'>http://www.supremeso...a></div></a><br />
<div> </div><br />
<div> </div><br />
<div> </div><br />
<div> </div>
<div> </div><br />
<div> </div><br />
<div> </div><br />
<div> </div>
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
