2 replies to this topic

[psycho132]

hi all ive just purchased a bellfruit select a nudge and was a bit dissapointed to find it had been changed from an electromechanical machine into some sort of early pcb board .. all the reelsetc are still mechanical but no cams or relays ..doesnt seem to play the same either . also having a few problems with machine if anybody could help ...
coins mech keep opening and closing when u try to put a coin in and sometime no credit registered ..also sometimes u dont get correct amount of nudges ie earlier i had bellfruits in veiw and machine only moved 2 when machine gives 6 at all times ..if anybody has any spare bottom mechanical workins off this machine or fore and aft id be very interested in buying to see if machine could be put bk to original workings .. also a bottom glass as this 1 is very feded now ...
see enclosed picture for the inside showing the missing mechanical workings

Attached Files

•  $(KGrHqNHJDME91Hu,!11BPl9rWV!P!~~60_12.jpg   42.05KB   33 downloads

Edited by robinhood75, 07 May 2012 - 11:04 PM.

[stanmarsh14]

Looks like a hybrid, poss based on BFM's Black Box tech.

However as Tommy has said, best place would to ask over at the Mecca, as the lads know this sort of hardware well.

(Hope to hell you do not have to replace all the dam RIFA caps)