Jump to content


Photo
- - - - -

Project Amber Christmas Release..ish.


  • Please log in to reply
19 replies to this topic

#1 Guitar

Guitar

    Project Amber Developer

  • Layout Creator
  • PipPipPipPipPip
  • 2989 posts

Posted 24 December 2012 - 05:01 PM

Those of you waiting for the stable release of Project Amber, I'm afraid (in keeping with the Amber Tradition) will have to wait a little bit longer.

 

I did promise a release tomorrow and there will be one, but it won't be the super stable fully supported release I hoped it would be.

 

I will post over at DadsFME sometime tomorrow in the emu development thread, so those of you who just can't wait can have a play.

 

The release thread alone will probably take a few hours to put together, and there is some major finishing off work left to do.

 

For those of you not following the development thread the state of the emulator at present is as follows...

 

Supported techs are MPU4, Scorpion 2, M1A/B, System 83, Scorpion 1, MPU3.

 

MPU3 and Scorpion 1 have mild issues with some games at present, the drivers need a thorough going over which I had hoped to have done by now.

 

System83 is playable for Cops and Robbers (the very first one), and I will see later tonight what other games I can get running / will already run. As it stands right now the AY8910 chip isn't attached, If I get time tonight I will sort it.

 

M1A/B is running, and every game I have tested runs ok, though I have only tried 4 games. The NEC chip is supported, the OKI chip isn't as yet, neither is the AY8910 chip however the next job is to support those chips in M1.

 

Scorpion 2 is running rather nicely now, the Dot Matrix is supported, including the DMD/Game link, so features should work properly. The NEC sound chip is supported, but the YM2413 chip is not, and I have no plans for it to be emulated by tomorrow either. However having got the AY Synth chip up and running now, this hopefully wont be too far behind. The YMZ280 chip for Spotted Dick and How Big's Your Rock (which runs just fine door closed now) will be looked at this evening and is 95% complete.

 

MPU4 is the star attraction, with the OKI, NEC, and AY8910 sound chips installed and working already, I just need to emulate the 7 Seg extender boards, fix a couple of known bugs, and its pretty much good to go. Except as I type that I just remembered that 6/7 Reel games are not currently supported either. A solid couple of hours should see it working fully.

 

That's as it stands right now. By tomorrow I hope to have NEC/AY8910/OKI chips installed on all required techs (save for the OKI on Scorp 1, which only affects Crazy Crocs game). I will also try and add the last few extenders to MPU4.

 

Over the next few days after that work will begin on getting the YM2413 chip emulated, along with a bit of a graphical overhaul for the main menu's. I will sort the bugs in Scorpion 1 and MPU3, fix the layout editor, and at LONG last write the docs.

 

With all that negativity out of the way... some good news, here's a list of stuff Amber can now do layout wise...

 

The sound (oh god sound again) I have completely rewritten, along with the sound tool you have seen already which is now built in to the emulator. The chips actually work this time around, and I have managed to get rid of most of the annoying pops and clicks that were creeping in. And you know, make it play the right sounds at the right time. For the most part the emulator will autodetect Sound Settings (Synth sound must be enabled as an option, Similarly the serial version of the NEC chip must be enabled as an option).

 

The OKI chip has had a thorough going over, and even supports stereo effect creation as used on M1a/b.

 

The AY8910 synth works as far as I can tell from limited testing, certainly it works for Smash and Grab and Nickelodeon, but there are probably a hundred or so games I haven't tested so who knows. It sounds right this time around, and works 100% fine in Windows 7 (whether it works in XP or not I haven't had time to test).

 

Dimmed Lamping is supported on all techs, though some techs are currently using a dummy multiplexer to save cpu cycles as certain techs didn't do dimming as such, but you still get the lamp fade in / out as it should. The exception is Scorpion techs which could do dimming, but they had a sort of self contained multiplexer, as far as i can see no docs exist that detail the operation of the system, I will take a look at trying to figure out whats going on eventually, but getting the main bulk working has been the priority. I also couldn't think of any Scorpion games that actually used the dimming system, though I am probably wrong, answers on a postcard...

 

Reel Bounce is now available having rewritten the reel drivers completely earlier in the year to try and improve my original driver which only worked for MPU4, occasioanally.

 

I will Included a few options for adjusting bounce from game to game, though as it stands right now it has been adjusted from tech to tech by me internally. Reels will also stop slightly (very slightly) off center by 3 pixels either way, and the bounce is somewhat related to the speed of the reel, so you will get less bounce from a reel nudge than you will from a sudden reel stop, (as you should). Reel masking works nicely now allowing for only the symbol to light up whilst the main band stays dark.

 

The Alpha display can be coloured any colour you wish (those of you using red or pink will get some kind of punishment!) also a glass layer can be overlaid at a variable brightness, and the background of the alpha can also be varied. The alpha will get smaller default Alpha's as part of the graphical upgrade. Whilst I think my current alpha does look pretty good, it doesn't fit many layouts at its natural resolution, and doesn't scale that well either, so for better scaling support I will be fixing this shortly.

 

The Dot Matrix is in and working for Scorpion 2, the graphical upgrade will allow for a glass layer to go in front of it for a bit more authenticity.

 

So that's where its at. Aside from the YM2413 emulation, everything else is fairly straightforward and shouldn't take that long, though there is a fair bit to do, its mostly small jobs.

 

Any reported bugs will be looked at and corrected as quickly as possible.

 

Once I release the interim emulator tomorrow it would be nice if a few layouts could be created for it. I'm hoping to have a nice stable version of the emulator within two weeks.


Project Amber 2 - Coming Soon


#2 cashbox1

cashbox1

    The furniture

  • Layout Creator
  • PipPipPipPipPip
  • 2553 posts

Posted 24 December 2012 - 05:19 PM

im hoping santa brings me a pc that can run all that lol  :D


Einstein`s theory of FME 90 downloads = 3 thanks


#3 richy1976

richy1976

    The furniture

  • Regulars
  • 2601 posts

Donator

Posted 24 December 2012 - 05:39 PM

Nice one Guitar & thanks for all the work you put in :)



#4 andy-1

andy-1

    Layout Creator

  • Layout Creator
  • PipPipPipPip
  • 1987 posts

Posted 24 December 2012 - 06:50 PM

Looking forward to the release Guitar



#5 Guest_ricardo de ponsa_*

Guest_ricardo de ponsa_*
  • Guests

Posted 24 December 2012 - 06:50 PM

Hi Guitar, just reading your post makes my head spin LOL. Thanks for putting in so many hours into what is a very complex project with so many variables, plus trying to make the finished product work on different platforms correctly. To say it is a difficult and (at times) a thankless task is an understatement. Thanks for all your hard work this year (Amber,etc) and wish you a Merry Christmas and a happy and healthy New Year.

Look forward to the finished release as and when it's ready. Cheers.



#6 skyblusam

skyblusam

    Junior Member

  • New Members
  • 51 posts

Posted 25 December 2012 - 12:44 AM

Top man thank you :thumbs_up:



#7 Bencrest

Bencrest

    The furniture

  • New Members
  • PipPipPipPipPip
  • 7446 posts

Posted 25 December 2012 - 02:01 AM

It's great to see that you are pushing on with this project Guitar, many thanks for your continued efforts! 


Ben
 
Hopefully recovering from years of compulsive gambling and wanting to be gamble free forever.
 
Recommended reading - http://www.gamblersaloud.com/ (yes, I bought the book, very happy with it!)

#8 Guitar

Guitar

    Project Amber Developer

  • Layout Creator
  • PipPipPipPipPip
  • 2989 posts

Posted 27 December 2012 - 03:49 PM

Alternatively I could pick up a virus and spend 3 days in bed feeling sick and dizzy, including Christmas day :(

 

Normal service will be resumed as soon as I can see daylight without getting a headache.


Project Amber 2 - Coming Soon


#9 andy-1

andy-1

    Layout Creator

  • Layout Creator
  • PipPipPipPip
  • 1987 posts

Posted 27 December 2012 - 06:21 PM

Take it easy Guitar. You need a break after all the coding you have done to get amber this far.



#10 Guest_ricardo de ponsa_*

Guest_ricardo de ponsa_*
  • Guests

Posted 27 December 2012 - 06:53 PM

pilky, on 25 Dec 2012 - 01:32 AM, said:

took all that in .. nice 1 .. thx for all that guitar i soak up knowledge like a sponge ..

Sponge Head Pilky SquarePants. lol

 

 

Guitar, on 27 Dec 2012 - 4:14 PM, said:

Alternatively I could pick up a virus and spend 3 days in bed feeling sick and dizzy, including Christmas day :(

 

Normal service will be resumed as soon as I can see daylight without getting a headache.

Yes I agree with Andy. take it easy M8.



#11 impact

impact

    Error 9.4

  • Regulars
  • 1280 posts

Posted 30 December 2012 - 06:53 PM

Topman hope your feeling better and that you`ve had a good xmas. Thank you for the update also


.._-=It`s not a problem only a challenge =-_..

#12 Guitar

Guitar

    Project Amber Developer

  • Layout Creator
  • PipPipPipPipPip
  • 2989 posts

Posted 30 December 2012 - 10:53 PM

impact, on 30 Dec 2012 - 7:18 PM, said:

Topman hope your feeling better and that you`ve had a good xmas. Thank you for the update also

 

I would've had a better Christmas has I not been ill, but overall it wasn't bad.

 

To be honest I can't wait for 2012 to be over, its been a shit year. I lost 2 grandparents, a dog, and nearly 2 cats. 

 

That said it hasn't been a bad year FME wise, Amber is very close to completion now, MAME doing things with Ecoin hi tech, and SC4 dond (if u like that sort of thing), and a new Epoch emulator on the way. Not bad for a dead scene!


Project Amber 2 - Coming Soon


#13 Guitar

Guitar

    Project Amber Developer

  • Layout Creator
  • PipPipPipPipPip
  • 2989 posts

Posted 01 January 2013 - 03:43 AM

There will be a very interesting release on Dads tonight...

Details to follow


Project Amber 2 - Coming Soon


#14 Guitar

Guitar

    Project Amber Developer

  • Layout Creator
  • PipPipPipPipPip
  • 2989 posts

Posted 01 January 2013 - 09:42 PM

Uploading as I type this, Project Amber 10132 has been released at Dads.

 

An installer pack version is available for those of you who don't want to mess about with installing dll's manually.

 

ALL sound is now working.


Project Amber 2 - Coming Soon


#15 Guest_DAD_*

Guest_DAD_*
  • Guests

Posted 01 January 2013 - 10:38 PM

Guitar, on 01 Jan 2013 - 10:07 PM, said:

Uploading as I type this, Project Amber 10132 has been released at Dads.

 

An installer pack version is available for those of you who don't want to mess about with installing dll's manually.

 

ALL sound is now working.

...and a very good release it is too, especially now How Bigs Your Rock is working 100%.



#16 sturthrt

sturthrt

    Junior Member

  • Regulars
  • 82 posts

Donator

Posted 01 January 2013 - 11:03 PM

it wont let me download the installer version over at dads the link does nothing?



#17 Guest_DAD_*

Guest_DAD_*
  • Guests

Posted 01 January 2013 - 11:20 PM

sturthrt, on 01 Jan 2013 - 11:28 PM, said:

it wont let me download the installer version over at dads the link does nothing?

Sorry that was my fault - link is now working.



#18 richy1976

richy1976

    The furniture

  • Regulars
  • 2601 posts

Donator

Posted 01 January 2013 - 11:24 PM

DAD, on 01 Jan 2013 - 11:03 PM, said:

...and a very good release it is too, especially now How Bigs Your Rock is working 100%.

The hi lo reel is out by 1.



#19 Guest_DAD_*

Guest_DAD_*
  • Guests

Posted 01 January 2013 - 11:36 PM

richy1976, on 01 Jan 2013 - 11:49 PM, said:

The hi lo reel is out by 1.

Its fine on both my £5 & £15 versions.  Guitar has worked hard on this particular machine getting the reels right as in he early days it kept going out of sync.  Its possible that on occasion this is still happening.  Try resetting the machine and see if its still out of sync then.



#20 sturthrt

sturthrt

    Junior Member

  • Regulars
  • 82 posts

Donator

Posted 02 January 2013 - 01:36 AM

DAD, on 01 Jan 2013 - 11:45 PM, said:

Sorry that was my fault - link is now working.

thanks






1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users