Junior Member
Posted 26 February 2013 - 03:26 PM
Hi all
Just bought a fruit machine aladdins cave. Only just had it delivered today. On start up not to much happens, Only a slight buzzing &
a bit of a line of 00000 - I left it on for about half an hour but didn't change apart from the payout noise went of for a while. It was ment to of worked before I had it delivered. Does it sound anything simple? Any help would be great 
Thanks
Edited by Rollie, 26 February 2013 - 03:38 PM.
Junior Member
Posted 26 February 2013 - 04:42 PM
Junior Member
Posted 26 February 2013 - 05:15 PM
Thanks for the reply, I did check, but will double check
Guest_Tommy c_*
Posted 26 February 2013 - 07:47 PM
Check the battery on the mpu4 board for leaking this is what it sound like to me,if the battery is furry take it off for a start and clean any green moldy bits off the mpu 4 with a toothbrush then allow to dry and plug back in. With the payout solanoids firing randomly and the alpha display playing up it deffo seams like the battery has leaked all over the mpu4. Your best bet for a quicker response is to visit www.fruitemu.co.uk
Edited by Tommy c, 26 February 2013 - 07:48 PM.
Senior Member
Posted 27 February 2013 - 08:29 AM
*Comes in hoping it's the 2p PCP version, leaves dissappointed*
Member
Posted 01 March 2013 - 09:42 PM
Sounds Like A New Mainboard Is Required :/ (Check In The Mainboard & Ensure The battery Has Not leaked)
Im Sure It Has If Your Solenoids Are Firing, Your Going To Ether Need A New Board Or That Repaired
Emulator Manipulator
Posted 01 March 2013 - 10:08 PM
*Comes in hoping it's the 2p PCP version, leaves dissappointed*
It doesn't run IIRC. Many years ago I was sent a set of glasses but sadly they arrived smashed. That's about the closest we've ever come to seeing it emulated 
Though it still doesn't top the list of most wanted for me. That accolade belongs to Step 'n' Skip.
Fruitworkz current projects..
Line Up Prototype.
Amber MPU3 Edition.
0 members, 2 guests, 0 anonymous users
