8 replies to this topic

[sanja141]

i had the above machine given to me a while back an was told the cashflow was broke,finally got round to getting one, put it in an all im getting is error code 91 00 illegal mode,can anybody offer some guidance to solving this or a manual as im pretty much a novice thats in advance

 

 

 

*** Edit by Daryl ***

 

Moved into Real Fruit Machines for better responses to question.

[impact]

Sound like you stake and prize`s key is loss or if its one with switchs you mite of nudged one while replacing your coin mech 

[stanmarsh14]

Hang fire, I have seen this error before, and you would be forgiven thinking it's the stake / prize or %age key.

However I have learned from previous experience it could be a fault with the Impact PSU (I've encountered this problem 3 times so far, and all faults fixed when I used a known working PSU), so you will be wanting to have a look at this.

 

But first thing is first..... you need to check your stake / Prize and Percentage keys to make sure they are firmaly inserted in to the mainboard, and if they are the switchable type, to make sure they are set right.

Second.... if the fault does not clear, If you have a spare Impact PSU or can borrow one from another Impact based machine, I would suggest you do this and see if the fault remains..... if it don't, then you will know that the PSU will need repairing / replacement.

For help with this, there are many guys over at MPU Mecca who can help, and poss able to source parts from.

http://www.fruitemu.co.uk/ib/

Edited by stanmarsh14, 03 March 2013 - 11:50 PM.

[stanmarsh14]

Also you may find the following three documents useful for general Impact hardware guidance..... although they are for different machines from yours, they still contain general information on the JPM Impact V1 and v3 hardware that is relevant to your machine, as well as info on Mech's etc.....

 

http://www.butters69....com/Impact.zip

The Big Bucks doc is the best one to refer to for drawings, having scanned this one myself from my own collection.

[sanja141]

wow thanks for the reply guys,firstly i have switches for the stake etc in the cab they are place on the side and on the main board ive set these as instructed in the cab.i tried googling impact based psu but could not find out what it means,what does it actually mean,anti tamper measure psu?(sorry havent really got a clue)i havent a spare psu u,but willing to buy one if there nothing else could be at fault.thanks for ur help.

ive pulled one of the plugs of the speaker because the alarm is sounding if that helps.

Edited by sanja141, 05 March 2013 - 09:14 AM.

[impact]

Bacta6 std codes 91 00 any thing from 90 to 9f is software. Processor card or Impact then. Its not the psu i can tell you that 1million %. Impact would display error 56-xx.

 

On your processor card Partno. 045251 looking at it with the edge connector to your left D2 which is more or less top right there is that D2 which is a diode ZN404 tell me what way it faces. This is for only Combined processor and memory card

 

Also on Impact can you tell me if poss IC U13 which is next to the Data/Serial port if pin 7 has been cut or the leg has been removed also the reset led had been removed or is fitted.

 

Also try and do a complete ram clear turn off machine connect your speaker back on as you will need it. Hold the test button normaly red unless your left with a yellow rubber pad whiles holding it turn the machine on.Impact will try and reset but still keep holdings you will hear a number of pops comes from the speak. Ok impact will boot on its own or after 30 secon`s take your finger off the button. Impact will try and boot you may get error 53-xx. Thats more then normal as your forcing the ram to reset and its profile.

 

Another thing to try is take your wire off the speaker again power it up and just let Impact timeout. Its will just stay there with the error or will boot up as normal.

 

error 48-xx is Tamper Alarm BTW

[impact]

The other thing what i can also remember your machine is an electra so it will use bacta 6 code not vogue codes 9.0/9.1processor card/program is vogue as for electra bacta6 its 90-9F

 

Same as error 147/9.xx is vogue electra bacta6 is code is not in the software library. This is just some thing to bear in mind

[impact]

Just read your post again it`s that bloody mech

[sanja141]

ok bare with me i think ive ot this right u13 next to srial port the leg has been cut,the is an led just below the port i take it that is the reset led?which is there.the d2 diode is runnin down the card if that helps.holding reset button did not work alarm kept sounding an didnt reset will leave it on now to c if it times out .thanks guys for your help.