Jump to content


Photo
- - - - -

Bucks Bunny Fruit Machine Help


  • Please log in to reply
10 replies to this topic

#1 combatkev

combatkev

    Newbie

  • New Members
  • 3 posts

Posted 22 April 2013 - 07:39 PM

Hi New here was wondering if anybody could help me with my Bucks Bunny fruity I need the manual

 

any help with that would be great and i'm having trouble with the coin mech. It keeps rejecting all coins

 

again any help would be fantastic. Thanks all. :cute:



#2 SourceLeisure

SourceLeisure

    Member

  • Regulars
  • 245 posts

Posted 22 April 2013 - 11:08 PM

Its The General Manual )All Epoch Follow The Same Manual 

http://agemame.fruit...y/Maygay_El.pdf



#3 Bencrest

Bencrest

    The furniture

  • New Members
  • PipPipPipPipPip
  • 7446 posts

Posted 23 April 2013 - 09:53 AM

Hi New here was wondering if anybody could help me with my Bucks Bunny fruity I need the manual

 

any help with that would be great and i'm having trouble with the coin mech. It keeps rejecting all coins

 

again any help would be fantastic. Thanks all. :cute:

 

Did you buy it in that state, or has it been working fine and now just started rejecting coins?


Ben
 
Hopefully recovering from years of compulsive gambling and wanting to be gamble free forever.
 
Recommended reading - http://www.gamblersaloud.com/ (yes, I bought the book, very happy with it!)

#4 NickYerPesos

NickYerPesos

    OFFICIAL THREAD KILLER!!!

  • Regulars
  • 989 posts

Posted 23 April 2013 - 06:31 PM

Uploaded the actual "bucks bunny" manual to
www.arcademachinehelp.co.uk

#5 combatkev

combatkev

    Newbie

  • New Members
  • 3 posts

Posted 23 April 2013 - 07:03 PM

Hi all Thanks for manual absolutely brill really appreciate it. Yes I bought the machine like this. I think it was a bit unpredictable. I took the coin mech out of position and tried it and it worked for a few coins then stopped. Then back in position and nothing. I took it out and tried cleaning it ( warm water with slightly damp cloth) but this didn't solve it. 



#6 NickYerPesos

NickYerPesos

    OFFICIAL THREAD KILLER!!!

  • Regulars
  • 989 posts

Posted 23 April 2013 - 07:09 PM

I had a problem with a scorp 4 monopoly road to riches.. In the end it turned out to be a cold solder on the scorp 4 board itself.. The board would hear up and work and stop and start very periodically. If all else fails I would recommend a new scorp 4 board

#7 Bencrest

Bencrest

    The furniture

  • New Members
  • PipPipPipPipPip
  • 7446 posts

Posted 23 April 2013 - 07:43 PM

I had a problem with a scorp 4 monopoly road to riches.. In the end it turned out to be a cold solder on the scorp 4 board itself.. The board would hear up and work and stop and start very periodically. If all else fails I would recommend a new scorp 4 board

 

Pretty sure these run on EPOCH or One-Stop hardware, can't remember which, doubt it's Scorpion 4 even if some versions used Bell Fruit Eclipse cabinets. Don't hold me to that though! :)


Ben
 
Hopefully recovering from years of compulsive gambling and wanting to be gamble free forever.
 
Recommended reading - http://www.gamblersaloud.com/ (yes, I bought the book, very happy with it!)

#8 Mavroz

Mavroz

    odd job man...

  • Layout Creator
  • PipPipPip
  • 882 posts

Posted 23 April 2013 - 08:25 PM

The pics of Bucks Bunny i have seen, they are running on Eclipse Tech, although i am pretty sure i have or have seen roms on Scorp4 and Scorp 5 for it.



#9 NickYerPesos

NickYerPesos

    OFFICIAL THREAD KILLER!!!

  • Regulars
  • 989 posts

Posted 24 April 2013 - 06:49 AM

 
Pretty sure these run on EPOCH or One-Stop hardware, can't remember which, doubt it's Scorpion 4 even if some versions used Bell Fruit Eclipse cabinets. Don't hold me to that though! :)

My monopoly was definitely scorp 4 :)
Had to drive two hours to the guy I sold it to to replace it lol.

  

The pics of Bucks Bunny i have seen, they are running on Eclipse Tech, although i am pretty sure i have or have seen roms on Scorp4 and Scorp 5 for it.

Last two machines I had bucks bunny and monopoly r2r were scorp 4 machines.. Obviously they were probably released on other techs aswell but definitely scorp 4 for me.

Edited by NickYerPesos, 24 April 2013 - 06:50 AM.


#10 Bencrest

Bencrest

    The furniture

  • New Members
  • PipPipPipPipPip
  • 7446 posts

Posted 24 April 2013 - 10:25 AM

My monopoly was definitely scorp 4 :)
Had to drive two hours to the guy I sold it to to replace it lol.

   Last two machines I had bucks bunny and monopoly r2r were scorp 4 machines.. Obviously they were probably released on other techs aswell but definitely scorp 4 for me.

 

Monopoly was definitely always on BFG (Scorpion 4) hardware, but Bucks Bunny is a weird one, it seems to have been released on several different platforms :S

 

I've definitely seen it on Eclipse One-Stop hardware, and pretty sure I've seen it on EPOCH too but could be wrong. I'd seen it in Bell Fruit Eclipse cabinets, but assumed that while they were in those cabs, they'd have kept using the One-Stop hardware. 

 

Put simply, if I were buying one, I'd only get the one on Scorpion 4 :D


Ben
 
Hopefully recovering from years of compulsive gambling and wanting to be gamble free forever.
 
Recommended reading - http://www.gamblersaloud.com/ (yes, I bought the book, very happy with it!)

#11 NickYerPesos

NickYerPesos

    OFFICIAL THREAD KILLER!!!

  • Regulars
  • 989 posts

Posted 24 April 2013 - 11:19 AM

Wasn't juggling jackpots epoch?? Same sorta style init.
Games media and voodoo gaming were only around for a short while.. (Or definitely not very big releasers like bfg. ) so wouldn't surprise me if they used obsolete technology.




2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users