Jump to content


Photo
- - - - -

help with barcrest machine


Best Answer chasnbons, 14 August 2013 - 10:44 AM

Is this what you're after?

 

 

Also do you need a fuse as well?

 

If so what size?

 

 

Go to the full post


  • Please log in to reply
11 replies to this topic

#1 AndyT

AndyT

    Newbie

  • New Members
  • 11 posts

Posted 07 August 2013 - 05:08 PM

Can anyone pls help me I have just picked up costa del cash by barcrest and it does not light up it will play but has absolutely no lights I ak quite new to fruit machines so if anyone can help that would be great

#2 NickYerPesos

NickYerPesos

    OFFICIAL THREAD KILLER!!!

  • Regulars
  • 989 posts

Posted 07 August 2013 - 05:19 PM

Check on the inside.. make sure all the connections are seated correctly.. I would suggest especially checking your mpu (motherboard) and look for something like "Lamps" and the wiring directly next to the writing..  make sure they are all connected... follow the wires to make sure there isnt an extension clip thats come undone. etc.. basically check all the wiring..



#3 AndyT

AndyT

    Newbie

  • New Members
  • 11 posts

Posted 07 August 2013 - 05:35 PM

I cant see any loose wires I checked all of them could they have been turned off in the menu if so does anyone know how to get it up sorry I'm a newbie :-)

#4 NickYerPesos

NickYerPesos

    OFFICIAL THREAD KILLER!!!

  • Regulars
  • 989 posts

Posted 07 August 2013 - 05:43 PM

Does your alpha display anything.. do you get anything at all ??



#5 Guest_Tommy c_*

Guest_Tommy c_*
  • Guests

Posted 07 August 2013 - 06:00 PM

Could just be the fuse in the power supply.



#6 AndyT

AndyT

    Newbie

  • New Members
  • 11 posts

Posted 07 August 2013 - 06:11 PM

The alpha displays like normal the game plays but with no lights on the machine evan the coin slots dont ligh5 up I checked two fuses they looked allright. On the 34v board one light is solid green and the other is not lit dont know if that helps atall

#7 skabaz

skabaz

    Engineer of the World

  • New Members
  • PipPipPipPipPip
  • 2778 posts

Posted 07 August 2013 - 07:13 PM

the boards that are attached to the top glass,both leds should be green. if not then one of the fuses has blown.it may look ok but it will be blown.it will either be a 5amp or 6.3 amp. replace only with a 6.3 amp.

 

 

baz



#8 AndyT

AndyT

    Newbie

  • New Members
  • 11 posts

Posted 07 August 2013 - 09:46 PM

Just checked my psu power supply and the metal that holds the fuse inside is broken so I cant screw the fuse in

#9 NickYerPesos

NickYerPesos

    OFFICIAL THREAD KILLER!!!

  • Regulars
  • 989 posts

Posted 08 August 2013 - 05:33 AM

What tech does this machine run on.. I have a spare mpu5 psu thats no good for a machine.. might have something something you need

#10 AndyT

AndyT

    Newbie

  • New Members
  • 11 posts

Posted 14 August 2013 - 10:20 AM

Mpu5 its agreen lable psu

#11 chasnbons

chasnbons

    Junior Member

  • Regulars
  • 1282 posts

Posted 14 August 2013 - 10:44 AM   Best Answer

Is this what you're after?

 

Attached File  HPIM2513.JPG   133.16KB   1 downloads

 

Also do you need a fuse as well?

 

If so what size?

 

 



#12 AndyT

AndyT

    Newbie

  • New Members
  • 11 posts

Posted 17 August 2013 - 09:36 AM

All sorted thanks everyone.




2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users