Best Answer chasnbons, 14 August 2013 - 10:44 AM
Is this what you're after?
Also do you need a fuse as well?
If so what size?
Go to the full post
Best Answer chasnbons, 14 August 2013 - 10:44 AM
Is this what you're after?
Also do you need a fuse as well?
If so what size?
Go to the full post
Posted 07 August 2013 - 05:08 PM
Posted 07 August 2013 - 05:19 PM
Check on the inside.. make sure all the connections are seated correctly.. I would suggest especially checking your mpu (motherboard) and look for something like "Lamps" and the wiring directly next to the writing.. make sure they are all connected... follow the wires to make sure there isnt an extension clip thats come undone. etc.. basically check all the wiring..
Posted 07 August 2013 - 05:35 PM
Posted 07 August 2013 - 05:43 PM
Does your alpha display anything.. do you get anything at all ??
Posted 07 August 2013 - 06:00 PM
Could just be the fuse in the power supply.
Posted 07 August 2013 - 06:11 PM
Posted 07 August 2013 - 07:13 PM
the boards that are attached to the top glass,both leds should be green. if not then one of the fuses has blown.it may look ok but it will be blown.it will either be a 5amp or 6.3 amp. replace only with a 6.3 amp.
baz
Posted 07 August 2013 - 09:46 PM
Posted 14 August 2013 - 10:20 AM
Posted 14 August 2013 - 10:44 AM Best Answer
Is this what you're after?
HPIM2513.JPG 133.16KB 1 downloads
Also do you need a fuse as well?
If so what size?
Posted 17 August 2013 - 09:36 AM
0 members, 3 guests, 0 anonymous users