Jump to content


Photo
- - - - -

MPU 4 - Ding Dong Bells by Fruitworkzs


  • Please log in to reply
12 replies to this topic

#1 Deathclaw

Deathclaw

    Emulator Manipulator

  • New Members
  • 141 posts

Posted 02 September 2013 - 06:57 PM

Posted Image


File Name: Ding Dong Bells by Fruitworkzs

File Submitter: Deathclaw

File Submitted: 02 Sep 2013

File Category: MPU 4


from fruitworkzs
This is released as designed, as a prototype. The reason for this was because I wasn't sure if the one I DXED was actually MPU4.

If it was it was in a funny cabinet... I managed to find this thing when at my mother's house at the local seaside arcade. It had seen better days (both the machine and the arcade, it's gone now ) but I cleaned it up as best I could.

Note -

This machine is untested. I cannot work on it properly as I don't have the screen resolution to, nor do I want to. Of course being a basic pile of crap you'll only lose some of the bottom of the cabinet any way.

I would say enjoy but it, from memory, is like pulling teeth. Slow and painful. However IIRC when it does go Mega Roll it really does go. Just know you'll be in for the long haul, if you don't fall asleep before hand.


Click here to download this file


Fruitworkz current projects..

 

Line Up Prototype.

Amber MPU3 Edition.


#2 c0nfu53d

c0nfu53d

    Member

  • Regulars
  • 288 posts

Posted 15 October 2013 - 08:26 PM

Thanks for the release! I love this machine, even if it's a bit mean sometimes...



#3 Guest_ricardo de ponsa_*

Guest_ricardo de ponsa_*
  • Guests

Posted 15 October 2013 - 09:15 PM

Thanks  Vecs, love the totally honest description of the DX. I will enjoy, even though it's a real b**t**d !!!!! LOL.

Cheers M8.

 

I'm sorry to say this but it has been reported and i have found this to be true...

This file has been reported as broken because: Does not allow you to put coins in. All you get is an alarm and 11 flashing on it.

Sorry M8, but there is a problem.


Edited by ricardo de ponsa, 15 October 2013 - 09:24 PM.


#4 ady

ady

    The furniture

  • Moderators
  • 14204 posts

Posted 16 October 2013 - 02:22 AM

Report removed.

 

Open in MFMEv2 and it's fine.



#5 Guest_ricardo de ponsa_*

Guest_ricardo de ponsa_*
  • Guests

Posted 16 October 2013 - 09:40 AM

Report removed.

 

Open in MFMEv2 and it's fine.

Thanks Ady, will use V2.0 instead.


  • ady likes this

#6 vectra666

vectra666

    No1. Lurker

  • Layout Creator
  • PipPipPipPipPip
  • 9041 posts

Donator

Posted 16 October 2013 - 10:16 AM

This also works in mfme10.1 again not my layout but . Assume it's only the configuration that's to high
The more I do today, The less I do tomorrow.
Fme is alive and screaming into the 21st century!
Enjoy FME and Happy Gaming!!!!

#7 ady

ady

    The furniture

  • Moderators
  • 14204 posts

Posted 16 October 2013 - 11:22 AM

This also works in mfme10.1 again not my layout but . Assume it's only the configuration that's to high

 

To newer members,

 

In order to alter the config (speed) there is a tutorial in the knowledgebase under the support tab that'll assist you.. 

 

The reason this happens is due to a newer MFME version being released, although built on the previous version, act's in different ways after 'internal' alterations by the creator. 



#8 richy1976

richy1976

    The furniture

  • Regulars
  • 2601 posts

Donator

Posted 16 October 2013 - 11:53 AM

works fine for me on 3.2.



#9 ady

ady

    The furniture

  • Moderators
  • 14204 posts

Posted 16 October 2013 - 04:06 PM

Vec's,

 

If you want to add FW's work to a PM to us we can upload it and credit the work to him.

 

Same bandwidth for you, and there will only be a few mins delay as a Mod is usually online...if not it will be the same day.



#10 ady

ady

    The furniture

  • Moderators
  • 14204 posts

Posted 16 October 2013 - 06:27 PM

 

 

This is released as designed, as a prototype. The reason for this was because I wasn't sure if the one I DXED was actually MPU4

 

???

 

Surely you know what tech you are doing!

 

Can you not (yes you can!) open and easily check!



#11 Guest_Tommy c_*

Guest_Tommy c_*
  • Guests

Posted 16 October 2013 - 07:10 PM

 

???

 

Surely you know what tech you are doing!

 

Can you not (yes you can!) open and easily check!

I think that is an actual quote from fruitworkz.



#12 ady

ady

    The furniture

  • Moderators
  • 14204 posts

Posted 16 October 2013 - 07:47 PM

I think that is an actual quote from fruitworkz.

 

Thanks for the correction tommy.

 

Vec's uses so much from others it's a puzzle to me now!

 

Maybe a clearer release note?



#13 Guest_barcrest junky_*

Guest_barcrest junky_*
  • Guests

Posted 16 October 2013 - 08:06 PM

Thanks for the correction tommy.
 
Vec's uses so much from others it's a puzzle to me now!
 
Maybe a clearer release note?


Those were his (pandy's) exact words on the release note over at Fruit Forums. They could have done with translation though, I agree.

bj




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users