Jump to content


Photo
- - - - -

Astra Paty slots start up fault


  • Please log in to reply
41 replies to this topic

#1 straekseims

straekseims

    Junior Member

  • New Members
  • Pip
  • 302 posts

Posted 02 October 2013 - 09:07 AM

Just come back from Holiday and fired up the party slots (6 Appeal) and getting an error on start up...

 

 

Worked fine before I went, I unplugged the USB before we went so If it got stolen it wouldn't work and plugged it back in and now this happens??????

Attached Files


Edited by straekseims, 02 October 2013 - 09:23 AM.


#2 No1Stoney

No1Stoney

    Senior Member

  • Layout Creator
  • PipPipPip
  • 815 posts

Posted 02 October 2013 - 09:48 AM

Not something simple like you've plugged it into a different USB port to the one you took it out of?



#3 straekseims

straekseims

    Junior Member

  • New Members
  • Pip
  • 302 posts

Posted 02 October 2013 - 09:56 AM

I tried that but others do nothing.

 

The file listed as faulty is a windows startup file. Config is a configuration fault within windows, as there is no keyboard Im a bit stuck with what I can/Cant do lol



#4 richy1976

richy1976

    The furniture

  • Regulars
  • 2601 posts

Donator

Posted 02 October 2013 - 11:27 AM

Looks like it doesn't know where the boot device is.

Cant you plug usb keyboard in?



#5 straekseims

straekseims

    Junior Member

  • New Members
  • Pip
  • 302 posts

Posted 02 October 2013 - 11:47 AM

Would love to if I had a keyboard lol I only got a laptop lol

 

don't get how its gone from working to not working though, I have taken that USB out before with no problem.

 

Il have to buy one I guess.

 

If I was to get one, do you think I could get hold of a CD for it like its asking for, could someone send me a copy as I believe the games are saved on the USB?



#6 hurricane

hurricane

    Member

  • Regulars
  • 734 posts

Posted 02 October 2013 - 01:28 PM

Don't know if this will be of use to you:

http://support.micro...kb/307545/en-GB



#7 straekseims

straekseims

    Junior Member

  • New Members
  • Pip
  • 302 posts

Posted 02 October 2013 - 02:53 PM

Think its an older version of windows in these, Its annoying I tell ya!

 

don't wanna scrap it off as I have not had JP off all the games yet :-(

 

hopefully an engineer will know how to overcome this problem.

 

Im sure the other 2 usb ports do nothing so maybe an old keyboard would work as these may be from a time b4 usb keyboards lol.



#8 Cyberbob

Cyberbob

    Newbie

  • New Members
  • 31 posts

Posted 02 October 2013 - 03:25 PM

when shut down its corrupted.

 

happens all the time with all machines to be fair and there's no rhythm or rym, it just happens from time to time. I would try the r for repair with a keyboard, its not forgot its boot settings, that's a windows error. very common with anything with windows that gets hard shut off, ie switched off by power, biggest floor in all machines.

 

or you could remove hdd, put on a usb caddy connect to windows its 100% going to have errors & use windows to fix the errors, works with the rios all the time, I know nothing about these put it is a pc and windows and the end of the day.  could also bee a sign its time to change hdd so if you do get it running back it up as a must.

 

good luck



#9 straekseims

straekseims

    Junior Member

  • New Members
  • Pip
  • 302 posts

Posted 02 October 2013 - 04:00 PM

Il try a normal keyboard in it and see what happens.

 

If I need a new system, how much am I looking at?



#10 Cyberbob

Cyberbob

    Newbie

  • New Members
  • 31 posts

Posted 02 October 2013 - 05:14 PM

Il try a normal keyboard in it and see what happens.

 

If I need a new system, how much am I looking at?

 

Try everything first,

 

no idea otherwise, fingers crossed someone will step up.



#11 Magz

Magz

    Senior Member

  • Regulars
  • 887 posts

Posted 02 October 2013 - 05:21 PM

On a Windows box, most of the  time that error is a corrupt volume bitmap. As Cyberbob says, running the disk in a caddy on pretty much any Windows PC will allow a disk check. It's actually best to run it from a CMD prompt as chkdsk driveletteritcomesupasinexplorer: /R as this forces a full check of the actual files and marks bad sectors properly.

 

Should fix it just fine...



#12 Cyberbob

Cyberbob

    Newbie

  • New Members
  • 31 posts

Posted 02 October 2013 - 05:37 PM

On a Windows box, most of the  time that error is a corrupt volume bitmap. As Cyberbob says, running the disk in a caddy on pretty much any Windows PC will allow a disk check. It's actually best to run it from a CMD prompt as chkdsk driveletteritcomesupasinexplorer: /R as this forces a full check of the actual files and marks bad sectors properly.

 

Should fix it just fine...

 

Definitely,  

 

Then make a back up image, as once those bad sectors arise, its normally been switched on and off just too many times, new hdd will bring new life to it,

 

take your time, and you will be fine. don't guess restudy first or ask if unsure.

 

& its not my fault if it don't work, guidance is free & without prejudice :)   

 

Am sure others will know explain much better than I can.



#13 straekseims

straekseims

    Junior Member

  • New Members
  • Pip
  • 302 posts

Posted 03 October 2013 - 06:58 PM

Plugged a keyboard in and can only get to a CMOS menu thing.

 

this has no cd drive , only usb slots

 

what do you mean by "caddie"? and promps lol

 

Im near downham market if anyone can fix it I don't mind paying



#14 Bencrest

Bencrest

    The furniture

  • New Members
  • PipPipPipPipPip
  • 7446 posts

Posted 03 October 2013 - 07:15 PM

Plugged a keyboard in and can only get to a CMOS menu thing.

 

this has no cd drive , only usb slots

 

what do you mean by "caddie"? and promps lol

 

Im near downham market if anyone can fix it I don't mind paying

 

A caddy in this sense would be an external way of connecting the HDD to a computer, normally it's an empty USB SATA drive enclosure.

 

I'd love to help but some of these modern machines have strange quirks and I'd hate to give you the wrong advice and completely shag it :D


Ben
 
Hopefully recovering from years of compulsive gambling and wanting to be gamble free forever.
 
Recommended reading - http://www.gamblersaloud.com/ (yes, I bought the book, very happy with it!)

#15 straekseims

straekseims

    Junior Member

  • New Members
  • Pip
  • 302 posts

Posted 03 October 2013 - 07:52 PM

Its f***ed anyway lol

What it boils down to is a fault with window, take away internet and your looking at a repair by usb or a plug in drive, I don't have the tools to do it is the basics of it

#16 FruitBash

FruitBash

    Triple 7 Engineer

  • Regulars
  • 430 posts

Posted 04 October 2013 - 12:29 AM

Or the drive image either, I'd guess.

 

I'm thinking that you'll probably need to format the drive and put the Astra image back onto it, which can only be done if you've either got a copy of it yourself, or know someone who has.

 

You could ask to borrow the hard drive from someone who's got the same machine, and it would make things an awful lot easier. Thats if they'll lend it to you, of course. If not, get the to make an exact copy of the drive onto a CD, and we can advise you further. This is what I needed to do with my Barcrest sitdown, which someone on here kindly did for me.


<div><strong>Forum aimed specifically at Barcrest Triple 777 fruit machine</strong> - <a data-ipb='nomediaparse' href='<a href='http://www.supremeso.../t7/index.php''class='bbc_url' title='External link' rel='nofollow external'>http://www.supremeso...a></div></a><br />
<div> </div><br />
<div> </div><br />
<div> </div><br />
<div> </div>

#17 straekseims

straekseims

    Junior Member

  • New Members
  • Pip
  • 302 posts

Posted 04 October 2013 - 08:53 AM

Don't know anyone else with a 6 appeal, Spa has a astra slotto gambler but don't know if its the same running software?



#18 straekseims

straekseims

    Junior Member

  • New Members
  • Pip
  • 302 posts

Posted 11 October 2013 - 12:15 PM

Right just had the HD copied by an IT company...Plugged it back in....."No output going to sleep"  aarrrhhhhhh!!!

 

plugged in old HD "No output going to sleep" AAAARRRRRRGGHHHH!!!!!



#19 classics

classics

    Newbie

  • New Members
  • 24 posts

Posted 11 October 2013 - 12:31 PM

GO INTO BIOS SETTING CHECK THE RIGHT DRIVE IS BEING LOOKED AT ON START UP AS IT MAY NOT BE SEEING THE HD 



#20 straekseims

straekseims

    Junior Member

  • New Members
  • Pip
  • 302 posts

Posted 11 October 2013 - 12:37 PM

cant get in to settings as its black screen and it comes up with no signal, going to sleep. there is no start up screens at all? wouldn't go back to old fault when putting old HD in if that was the case?


I could make a video?






2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users