5 replies to this topic

[guswyl]

Hi All,

 

Long shot but....

 

... Has anyone got a spare LCD screen for a barcrest Rio cabinet? I'm missing the complete screen.

 

Or does anyone know where I might find one? I've tried all the usual places, ebay, e-service etc.

 

Ta

 

gus

[chasnbons]

Is this the machine that was on ebay in someones shed?

 

If so, then the reason you've got both screen images showing on one monitor is because someone has booted it up with only one screen attached, so you'll need a new image putting on the HDD and don't start it up again until you have everything connected to it, including BOTH screens.

 

You could try JNC in Bristol, they might have a screen

 

http://www.jnc-sales.co.uk/

[andrew96]

jnc currently don't have any, i asked a few weeks back as i need one for my test rig.

[guswyl]

LOL, it was indeed the one in someone's shed!. I have fixed the single monitor issue, you can fix this from the Barcrest Configure.exe on boot.

 

I have an ELO 17" touchscreen attached but can't get the touchscreen to work.

 

I tried JNC, which pointed me to E-Service.

 

is there any other screens that would fit this Cabinet?

[andrew96]

any  17 inch screen will fit if it has the right resolution, but you wont have the touchscreen. I have a microtouch 3m touchscreen monitor, it works but its not the same as the original and therefore the cursor is not in the same position as it is needed to be so is quite useless, and nope you cannot add the driver into the pc to make it work

[andrew96]

LOL, it was indeed the one in someone's shed!. I have fixed the single monitor issue, you can fix this from the Barcrest Configure.exe on boot.

 

 

 

yep, but you wont be able to calibrate ANY touchscreen from that menu as you get that screen up well BEFORE embedded windows xp ever loads the usb drivers for a touch screen!