2 replies to this topic

[fruitmachine13]

My line dancer machine has a new mpu scorpion 4 broad installed  and i do not get sound coin mech rejects all coins and lights are stuck on machine boot up what is causes this?

 

unknown if coin every worked what coin mech could i replace it with?

 

pic`s below on coin mech and short vid showing the light problem but the machine boots but no sound?

 

any help would be great 

 

Notes

• Machine old mpu was dead
• Coin mech hardness been checked and is fine 
• Power supply is working fine book says should be getting 13.5v but i get 12.30v 
• Machine hopper works
• machine plays fine in free play
• machine earth is checked and working fine 

 

Attached Files

•  $_571.jpg   244.85KB   1 downloads
•  20160105_1610111.jpg   82.83KB   1 downloads
•  received_8965411171086121.jpeg   55.36KB   1 downloads
•  received_8963820437911861.wmv   1.63MB   5 downloads
•  20160105_1637251.jpg   166.09KB   1 downloads

Edited by fruitmachine13, 06 January 2016 - 04:25 PM.

[fruitman69]

Sound might be something silly like the little plug going to the MPU has been missed reconnecting it.

 

Lights stuck on is a classic board fault generally, was it a 100% working board  for sure?

 

If its not the board you have a short on the lamp circuit somewhere.

[fruitmachine13]

the coin mech now works fine bad wire plug but the sound and light issue still to fix 

the lights are now off and do not come on but when i move the plug on the brake out board there get stuck on and do not go off 

 

vid to show that fault 

 

YouTube link: