29 replies to this topic

[captainhaddock]

File Name: Bar x Extreme

File Submitter: captainhaddock

File Submitted: 09 Dec 2016

File Category: Scorpion 5

Here's a classic layout of Electrocoin's Bar x extreme set on £70 jp multi stake on scorpion 5 tech.

 

All shortcuts as usual with keys 9 for £5 - 8 for £10 - and 7 for £20, It's working in standalone mode and the community feature does not work unless another machine is connected, you will have a couple of minutes wait for it to initialize - have fun!!

Click here to download this file

[bullionbars2011]

fantastic machine had 210 in teddys on this

[Johnnyafc]

Thankyou

[chasnbons]

TY

[DAD]

Ooooh lovely!! thanks for this lo-tech beauty

[vectra666]

Lo-tech goodness like these on £5 10p (is it switchable) not played on the big daddy stakes
Thanks.
Just when I think things are settling down emulation wise and I decide to crack on with my own another great game comes along.

Edited by vectra666, 09 December 2016 - 03:00 PM.

[I have finished]

Keep forcing coins in, get an alarm! Machine had initialised, beeped a few times, but still alarms. How do I correct this?

[captainhaddock]

Keep forcing coins in, get an alarm! Machine had initialised, beeped a few times, but still alarms. How do I correct this?

what error is displayed? 

[I have finished]

Sorry Captainhaddock, speech software cannot read out errors, in fact, only the menus and dialogue boxes are accessible. This is why I don't dabble with editing layouts. It also runs slow on my fast laptop.

[hitthesix]

Many thanks dave, much appreciated as always.

[captainhaddock]

if for any reason you have cleared the ram - the hoppers and coin mechs need setting up again..

[jackpot7]

Thanks for this Captain

Getting errors when i nudge reel 2 for some reason. Nice layout thought and quite fun to play.

[jackpot7]

Reel 2 ERR 22. seems to do it on a certain nudge (bar) X (bar) <---- how the reels are set up, if i don't take the winner i get the error . :/

[vectra666]

i had this

[vectra666]

as for the hopper error as changed the settings to £5/10p for two version do you just let it timeout and reset itself??

[richy1976]

Changing settings/roms has cleared the ram.

Edited by richy1976, 09 December 2016 - 06:04 PM.

[vectra666]

yes i changed the gam name thats what did it, so i re downloaded and justchanged the stake prize values all good, as for reel error2 still get it but i just auto nudge instead

[I have finished]

Hi Jackpot7, that's the error I get. Captain, is there a way of fixing this is a future release?

[captainhaddock]

If the ram has been cleared you need to do the following: -  open both doors - let it initialize - go into edit mode then configuration, check all the trusted boxes as shown below, then close the doors and let it start up and the hoppers are set up - not sure about the reel issue as I've played many hundreds of games and it's not something that I've experienced yet.  

Attached Files

•  config.jpg   85.3KB   7 downloads

[geegee-11]

i got same error on this too not complaining though just reset it thanks for this btw