813 replies to this topic

[vectra666]

i can,t get dads haunted house £25dx to set meters

[wearecity]

Vecs, that big white space can be closed off by using the mouse and dragging the right edge of it to the left.

Secondly after loading a layout, close off artwork and go into full screen borderless mode and press f8 to take a screenshot.

My game manager on this post.

http://dadsfme.co.uk...msg9864#msg9864

[wearecity]

I found a few mpu5 cant remember what they were though, the meters just counted up on their own, so set as no meters.

Are you sure it's not a case of the meters not working before, but now working in v5 so it's catching up.

In the early days of this thread I and Vecs mentioned such happenings with mpu5 machines in particular. Spiker The Biker being one such example.

[evo1]

i mean how do you save a screen shot and place it into the game manager tried spot on but not having it,

also does anybody know what the settings are to make open the box mpu5 by bruce george  meters work as not working atm

setting for meters after abit of messing round but dont shoot me down if there wrong but they seem to work at the mo if anyone know different please tell us

 

 Screenshot (394).png   1.08MB   0 downloads

 

Only spent about 5 mins on this

Edited by evo1, 31 May 2017 - 06:24 PM.

[ploggy]

Fantastic re-release and do love the slot.

Sadly on both downloads when you are in the game feature and get the roll even to advance in the feature,the slot does a complete reset.!

 

Jay

Sounds to me like a reel jumper issue.  Try and set the reel jumper to number '4', in the configuration window.  Then reload the layout and see if it resets again for you.  I just tried it and it hasn't reset on me.  Chris would still need to look at it though, just to see if there's anything else wrong with it.

 

 

i mean how do you save a screen shot and place it into the game manager tried spot on but not having it,

also does anybody know what the settings are to make open the box mpu5 by bruce george  meters work as not working atm

The meters are setup incorrectly.  On the old, leaked, MFME with MPU5 emulation, some of the early MPU5's meters' didn't work.  This was one of them.  On the MPU5 configuration window, where it says 'Sec - No - Yes', put it to 'No'.  Open The Box used meters, and not Sec's.  You might need to do a complete ram reset once you've changed everything.  

Attached Files

•  Reel Jumper Settings On MPU5.png   10.99KB   0 downloads
•  Open The Box Configuration.png   20.61KB   0 downloads

[ploggy]

I forgot to say that you'll need to change the offset on the top, Hi-Lo reel on Barmy Army to '0', as well.  I would have added that information to the previous post, but I can't edit it for some reason.

[vectra666]

thanks for the info ploggy worked a treat

it was return to the haunted house by DAD that don,t work yet

[ploggy]

thanks for the info ploggy worked a treat

it was return to the haunted house by DAD that don,t work yet

Meter 1 * 1  Meter 2 * 1  Sec = No

[wearecity]

Sounds to me like a reel jumper issue.  Try and set the reel jumper to number '4', in the configuration window.  Then reload the layout and see if it resets again for you.  I just tried it and it hasn't reset on me.  Chris would still need to look at it though, just to see if there's anything else wrong with it.

 

 

I've changed where it says Reel Jumpers 1, to 4 from 1 ALL, but then even after reload and save message, it goes back to 1 ALL off.    

[ploggy]

That happens with me as well, mate.  So it's nothing you're doing wrong.

 

Here are the two layouts I've got Barmy Army.  One is the classic Johnny did, and the other one is a DX by 'Mystery Person'?  They work, but I'm not 100% convinced they're setup correctly.  The bottom reels have different offsets, which is kinda odd.

Attached Files

•  Barmy Army Layouts.zip   5.07MB   9 downloads

[Wizard]

Don't spend any more time on this, there are some issues that need fixing.

[ploggy]

Don't spend any more time on this, there are some issues that need fixing.

Ok, mate.  Thanks for confirming there was an issue.

[gemini17]

Sounds to me like a reel jumper issue.  Try and set the reel jumper to number '4', in the configuration window.  Then reload the layout and see if it resets again for you.  I just tried it and it hasn't reset on me.  Chris would still need to look at it though, just to see if there's anything else wrong with it.

 

 

 

Cheers mate

 

I will have ago but alas have not the foggiest what you mean!!!  

 

Jay

[vectra666]

Running through the data base, God there's loads with the author's name ie jonnhyafc for instance all need changing and few layouts need totally redoing lamp,reel wise black n white for one

[vectra666]

games media-Andy Capp by mavroz on the version i had no meters set so i set em to sec2-1, sec3-1 for meters to work also on refill it asks for £1's and 10p's is there a 10p top up button?

Tommy c's gold rush 1024Wdx layouts set to meter1-1, meter2-1

Edited by vectra666, 01 June 2017 - 06:46 PM.

[hitthesix]

 is there a 10p top up button?

 

You will need to add one , just add a button and make it epoch 10p.

[vectra666]

getting a alarm54  on  pooks happy streak both sized layouts how can we get rid of this??

[richy1976]

Think i had this in my non runners folder that i accidently deleted.

Isnt 54 meter sense?.

Edited by richy1976, 10 June 2017 - 02:22 PM.

[Guitar]

Alarm 54 is Characteriser (GAL) Alarm.

[wearecity]

Who made this machine (edit I see it's Coinworld).

 

I had a fiddle around with this a while back and couldn't get it working.

Edited by wearecity, 10 June 2017 - 03:13 PM.