813 replies to this topic

[richy1976]

And red hot x please, mine error 93.

Thanks.

[wearecity]

Red Hot X.

Attached Files

•  Red Hot X.zip   8.99MB   51 downloads

Edited by wearecity, 15 January 2017 - 06:57 PM.

[Reg]

And red hot x please, mine error 93.

Thanks.

 

Before posting requests like this, can I ask is it possible you can post what you tried to fix this ?

 

WaC is stepping up and doing a great job trying to get a lot of this legacy stuff running himself which is a huge thankless task.

 

He's got to a lot of trouble posting what he has done, so do have a go yourself to fix things.

 

I am not having a go here, it's not really my place to say this, I just see WaC doing a lot of work himself here and the answers are probably in this thread.

Peace out...

[wearecity]

Cheers Reg, 

 

To be fair, I did rather go into this, with a bull in a china shop, feet first attitude, when trying to get these running. I'm far from the best person to do it and didn't have a plan and certainly didn't think, I'd be going through all these machines, But I have enjoyed learning as I've gone along. I don't open a layout without the diag running now lol.

 

Early on, I had made some changes to several layouts, before discovering what the issue was later down the line, after getting others running. So some layouts, may have had other changes I made that I haven't documented in the thread and therefore the layout may still be broken for some.

 

The ones I definitely knew I mucked about with, I've uploaded as I've gone along, or put in details about switch settings etc. The last couple of lots here, I'm sure I never mucked about with, but I guess one or two I may have.

 

Now I've discovered wrong alphas that can be changed and about removing the overlays off the 7 segs, I've just given myself another couple of jobs.

 

If I was to start this again, I'd do a common checklist on my findings, some general solutions in case people have other layouts I don't have and also an excel spreadsheet for each machine, with all the relevant settings.

 

[vectra666]

my lord of the rings two towers works fine the coin should be set to bit0 1also the notey works on this one but only gives change

them overlays on 7segs i've been removing them and making them the correct colours for ages still annoys the pants of me when creators whom make dx's leave the seven segs black n grey as said before its only a five mins jobby 

may need to redo this topic wearcity with the techs and the check lists underneath em then it should cover all layouts within each tech

Edited by vectra666, 15 January 2017 - 07:48 PM.

[wearecity]

Yes your one does, the 1280 version I have doesn't. 

 

I don't want to downside 

[vectra666]

stretch it lol , just shows some of my downsized layouts actually work better than their originals

[richy1976]

.

Attached Files

•  Lord Of The Rings (The Two Towers) DX £25 (bfm).zip   5.21MB   41 downloads

[richy1976]

I got the doors shut on pacman plus 16s 14c, still payout error tried all hoppers ticked\unticked.

[Wizard]

yes the payout error has been discussed before and a fix will be in the next update

[TommyC]

Thanks again wac for the update fixes

[wearecity]

Thanks Richy, this was the only one, that wouldn't save my changes to the coin mechanism.

I look forward to getting the few non working ones, hopefully with the next emulator update.

In the meantime I'm looking at updating the segs and alphas on the rest. I'm sure there's enough info already on this thread, for anyone interested in doing that.

[vectra666]

I got the doors shut on pacman plus 16s 14c, still payout error tried all hoppers ticked\unticked.

I'm sure PAC man plus works ok on mine I'll take a look laters and post back if so.

Edited by vectra666, 16 January 2017 - 08:20 AM.

[richy1976]

I think there's also a 1024 of pacman plus.

[wearecity]

I'm sure PAC man plus works ok on mine I'll take a look laters and post back if so.

Like Tetris, I think yours uses different roms.

As Wizard said previously there is something different about the wiring to the hoppers iirc.

AT who produced a lot of these layouts that needed fixing. They were from the very early days of 9.4, so probably had different resources.

Anyway let's just wait

[wearecity]

A couple of spACE fixes, I only have about 8 layouts.

 

Grand Prix by Tommy, the display can now be flipped the right way, go into edit, design mode, right click on the dot matrix and choose flip 180.

 

The Twilight Zone - Further Encounters by AT, just adjusted the offset under winlines.

 

Attached, if you don't want to alter your own.

 

A couple that have issues, Emmerdale DX, lamps all over the shop, when feature starts and sounds are slow in feature as well. Golden Mile DX and also the classic have an error 0044 on start up, which is a no % key error, tried various dips, can't get it to get past the error.  Post up this over at The Mecca, to ask for Wizards assistance. 

 

Also a Proconn, I found again in the wrong folder (don't tell Reg).

 

Five Times Cash by Tommy, edit, design mode, right click on coin mech, choose £1 proconn from the coin input list and apply and then save layout.

 

Also attached.

Attached Files

•  Twilight Zone Further Encounters.zip   8.33MB   40 downloads
•  Five Times Cash.zip   3.29MB   35 downloads
•  Grand_Prix_(Ace)1024dx.zip   3.12MB   38 downloads

[TommyC]

Five times cash is gonna get a dx update soon,i have found some proper arcade roms for it so i will update once i get round to it.

[gemini17]

 

A couple of spACE fixes, I only have about 8 layouts.

 

Grand Prix by Tommy, the display can now be flipped the right way, go into edit, design mode, right click on the dot matrix and choose flip 180.

 

The Twilight Zone - Further Encounters by AT, just adjusted the offset under winlines.

 

Attached, if you don't want to alter your own.

 

A couple that have issues, Emmerdale DX, lamps all over the shop, when feature starts and sounds are slow in feature as well. Golden Mile DX and also the classic have an error 0044 on start up, which is a no % key error, tried various dips, can't get it to get past the error.  Post up this over at The Mecca, to ask for Wizards assistance. 

 

Also a Proconn, I found again in the wrong folder (don't tell Reg).

 

Five Times Cash by Tommy, edit, design mode, right click on coin mech, choose £1 proconn from the coin input list and apply and then save layout.

 

Also attached.

 

Fantastic with the updated slots-many thanks.

 

Been in a hurricane of chest infections/stomach bugs the past few week on top of xmas/new year pressures so hardly had a moment to read any posts etc.

So posts as above are more than welcome.

 

Cheers 

 

Jay

[TommyC]

Five times cash is gonna get a dx update soon,i have found some proper arcade roms for it so i will update once i get round to it.

It seems i no longer have the art for this,i can't extract it from mfme as i left the on image in there i'm gonna try and find some buttons i've redrawn the decals and it should be ok to go.

[Neophyte]

Thanks so much for this thread, i've picked through a lot myself but there is some real gems in this thread, tbh i'm quite enjoying going through everything and tinkering.

 

i have been having some real weirdness with the reels staying level on robin hood wdx and a fmeconv of the paparazzi wdx, and cant for the life of me gets dads donkeykong wdx going or pooks cosmic casino due to alarms, probably something silly i am missing but will continue playing about.

 

once again thanks so much for this thread.

 

Simon